de-volumize my valve??

[chafnerjr]

Seriously? Getting 10-12 shots off of a 12gram is terrible! My friends stock A-5 even got 24 or so, I can't believe that a mag valve is that bad.

Now now, we all know how big an air hog a mag is

[SSP REAPER]

Now now, we all know how big an air hog a mag is

no more so than a tippmann... LOL

[Ando]

no more so than a tippmann... LOL

...and I believe was the reason Tom came out with the 6 pack

[SSP REAPER]

...and I believe was the reason Tom came out with the 6 pack

hehe 6 pack.... mmmmm what flavor?

You want to devolumize or devalue your valve? Send it over to FA22RaptorF22 for service. He'll make sure he tunes it for "temperature dependancy"

[autumnsscope]

LThanks for all your input, I may just run a 3.5 oz vertically and not bother with trying to de volumize instead of doing 12 grams. You guys have been a big help though

[autumnsscope]

here's a pic of my what my pumpmag looks like now, my original plan was to chop off the feed neck and run a phantom stock class feed and a 12 gram bucket changer vertically. I'm not totally sure where Im going with it now. its one of Jay's kits, and I had the milling done by warpedmephisto.

[Ando]

Chop your feedneck down about a inch.

Install this...
http://cgi.ebay.com/Ego-paintball-Cl...item3a52bcd11a

And get yourself this...
http://cgi.ebay.com/Stock-Pump-Strai...item27af345f49

I'm gearing up one of my pump mags with the same setup. I have the clamping feed neck and the feedtube which work great with each other. The bottom of the feedneck you'll have to shim to your bodies feedtube. The feedneck is a little large at the bottom but works with a little O-ring love or tape

[Looper]

You may want to check out Lukes work... [scroll to the bottom]

I had a right feed converted to a feed tube then bead blasted. It looks like it came from straight from AGD.

[autumnsscope]

You may want to check out Lukes work... [scroll to the bottom]

I had a right feed converted to a feed tube then bead blasted. It looks like it came from straight from AGD.

Yeah of seen his work around, it looks great. I had thought about doing this because it would deff. look better than a cci feed, but also more expensive.

[flyingpootang]

I devolumized mine with nylon washers just enough to be able to shoot HP air and to get a few extra shots from a 12g. Get a magnified glass and look just below the power tube on your valve, you might get lucky and have a valve that was only laser welded in 1 spot and loctited together like mine...