Just picked up first MAG, a few questions..

[Frizzle Fry]

What metal is the MM body made out of?? Stainless, copper, gold etc..

Stainless steel.

Twistlock bodies are SS, and came from the factory polished, bead blasted gray, teflon black, and a couple gold-plated.

Plenty of people have Krylon'ed, powedercoated, ceracoted, and otherwise plated/painted bodies though.

[CatoRockwell]

the frame doesn't affect the bps. It's all about personal preference but I personally prefer the Intelli.

[Jacobd]

Do the intelli frame's bump up the bps?? I picked up a second one also(yeh i know i didnt even get the first one yet and look what's happening haha) and it has a green Benchmark on it.

How does the Bench. hold up against the intelli??

No, an Intelliframe is just a good solid two-finger trigger made by AGD, often though they are modded to make a "Pneumag" which makes the trigger pull very soft and easy to walk, as far as I know Benchmarks change the trigger geometry to make the pull kind of "long and smooth" rather then "short and crisp" some people like'em some don't, I've never tried one.

Do AGD black teflon bodys actually have anything to do with teflon? I've wondered that for a while.

[Track89]

Stainless steel.

Twistlock bodies are SS, and came from the factory polished, bead blasted gray, teflon black, and a couple gold-plated.

Plenty of people have Krylon'ed, powedercoated, ceracoted, and otherwise plated/painted bodies though.

Has anyone ever tried to rust out the body?? Not tryin' too destroy it but am curious to see what it would look like w/ the rite part's

[Dominic]

Has anyone ever tried to rust out the body?? Not tryin' too destroy it but am curious to see what it would look like w/ the rite part's

First the AGD Intellifeed can only help BPS if you learn how to shoot it right, I myself prefer it over the single trigger, and Benchmark. The bodies are made of Stainless steel or Aluminum, they do not rust. If you have original stainless bodies you need the twist lock barrels, almost all others take cocker threaded barrels to my knowledge. :rofl: You have already bought another mag? Do you have any pictures to post of it? They are too much fun to play around with, but you will find that once you get one configured the way you want you should never "need" a back up marker. My original Automag from 1994 still works great and I am the 2nd owner. They are built like tanks. My suggestion to you is save some money and go play first.

[CatoRockwell]

First the AGD Intellifeed can only help BPS if you learn how to shoot it right, I myself prefer it over the single trigger, and Benchmark. The bodies are made of Stainless steel or Aluminum, they do not rust. If you have original stainless bodies you need the twist lock barrels, almost all others take cocker threaded barrels to my knowledge. :rofl: You have already bought another mag? Do you have any pictures to post of it? They are too much fun to play around with, but you will find that once you get one configured the way you want you should never "need" a back up marker. My original Automag from 1994 still works great and I am the 2nd owner. They are built like tanks. My suggestion to you is save some money and go play first.

I know, my E-Tac never went down, but I still built a backup mag... too addictive. I want more.

[Track89]

First the AGD Intellifeed can only help BPS if you learn how to shoot it right, I myself prefer it over the single trigger, and Benchmark. The bodies are made of Stainless steel or Aluminum, they do not rust. If you have original stainless bodies you need the twist lock barrels, almost all others take cocker threaded barrels to my knowledge. :rofl: You have already bought another mag? Do you have any pictures to post of it? They are too much fun to play around with, but you will find that once you get one configured the way you want you should never "need" a back up marker. My original Automag from 1994 still works great and I am the 2nd owner. They are built like tanks. My suggestion to you is save some money and go play first.

Yeh, the second was a deal i couldnt pass up $100 shipped w/ benchmark, trigg, lvl10 'n a few other goodie's.. But the OP deleted the thread which i was a little sketched out about.

[Frizzle Fry]

Has anyone ever tried to rust out the body?? Not tryin' too destroy it but am curious to see what it would look like w/ the rite part's

Well, you could practice on a destroyed body; they don't die on their own, but plenty of people have intentionally ripped off feednecks with projects in mind then abandoned them.

My friend has a case-hardened MM body?

[Track89]

So i get the Splashed Mini and of course air it up rite away.LEAKING out the barrel like no other haha. Not worried but was told it was in %100 working condition. What could it be..

I'm having issues with the pic's, keep's saying invalid file type.. go figure

[CatoRockwell]

create an account on something like Photobucket. Then when you've uploaded your pictures on their site, go to the "Get Link Code" option and pick the one for forums.

[Frizzle Fry]

So i get the Splashed Mini and of course air it up rite away.LEAKING out the barrel like no other haha. Not worried but was told it was in %100 working condition. What could it be..

Here's the trio as of today, still waitin' on second Mag to arrive.

How do i enter pic's?!

For pics, try Tinypic.com or Imageshack.com and use the "forum" code.

As for the leak, give a generous squirt of Autolube/Gold Cup/Extreme Rage oil into the ASA, and put a drop in the lube point on the valve. Then gas up the marker with the trigger held down, and take a few shots... It won't necessarily cure your problem but I've found that it takes care of plenty of things that might appear to be bigger problems.

[Track89]

For pics, try Tinypic.com or Imageshack.com and use the "forum" code.

As for the leak, give a generous squirt of Autolube/Gold Cup/Extreme Rage oil into the ASA, and put a drop in the lube point on the valve. Then gas up the marker with the trigger held down, and take a few shots... It won't necessarily cure your problem but I've found that it takes care of plenty of things that might appear to be bigger problems.

Will do, but the gun from head-to-toe was oiled up prior to shipping. Almost slipped out of my hands when i took it out the box..

He said the powertube 'ring was replaced and it could be the on/off is stuck.

[Track89]

[IMG][/IMG]

[IMG][/IMG]

[Track89]

Do mag's need a certain amout of pressure from the tank to fire correctly??
It was the velocity that was causing it to leak from the barrel but now it wont fire! The trigger is aired up but when pulled nothing at all happen's.


Still a noob to mag's but i'm learning more from your help day-by-day

[211]

Mags need 800 psi + to work properly