Saturday's day with the magS

[Carnage reigns]

So I shot my newly built mag Saturday and it was a disaster! The bolt kept after sticking every shot. I was really upset. But then to the rescue was a all mechanical (no board) E-Mag owned by a friend who's a tech at the field. And it shot AMAZING!

[Ando]

Did he fix yours?

[Carnage reigns]

He's going to put a different size spacer in it. I need to call him and see if he needs me to order the spacers from AGD.

[SSP REAPER]

He's going to put a different size spacer in it. I need to call him and see if he needs me to order the spacers from AGD.

Let me know what you need for spacers. I have plenty of each size on hand

[chafnerjr]

That initial tuning is very very important. Make sure you watch the available videos about how to do it. it's simple and very important to understand. As long as you're mag's tuned and oiled your not going to have many problems if ever. (That is until you start moding.... then who knows )

[Carnage reigns]

Should I wait til I get my mag just like I want it b4 I have the valve tuned or will it not matter?

[Stayhuge]

Shouldn't matter. What are you planning on doing to the mag? New body, rail, trigger frame? None of that shoudl affect the valve.,. A Pneumag or cheater set up might require some additional tuning, but most likely not. Def get the sticking problem resolved. Good luck

[Carnage reigns]

The body and I got it fixed, thanks

[paint magnet]

AGD still hasn't got me sold on Level 10 yet. Pulled my level 7 Mag out today and ran it over the chronograph...no problems, and it hasn't seen air in over a year.