Egomag Complete!

[Chronic788]

After months of tracking down parts and a few weeks of assembly I just finished my new Egomag! Everything came together perfectly and I couldn't be happier with it. It has the best of both worlds: Automag reliability and smoothness coupled with electro speed. It keeps up with the newest guns out there.

The best part is that I bought an extra rail and sear assembly so that if the electronics ever go down for some reason, I can simply throw on the extra rail with my Inteliframe and Im good to go.

A special thanks goes to Rouge for going out of his way to get me a Shadow Rail!

Parts Used:
-X valve
-ULT Trigger pull kit (5 shims)
-Stock Etek 2 Trigger frame
-Stock Etek 2 Board
-DP RAPS ASA
-MPA-3 Actuator
-Luke's Piston
-Palmers Pursuit 10-32 UEF to 1/16 ID tube Low Profile Elbow
-SMC S070C-SDG-32 Solenoid
-WGP OutKast LPR
-RPG Shadow Rail







I had to mill a little bit off of the bottom shelf directly below the battery to make room for the supply air line as seen here:


Tight fit:


Screw Placement:



Hope you guys like it. Feel free to comment or ask any questions!

Video: http://www.youtube.com/watch?v=ngGj8P4vHys

[Schven79]

Man that is a CLEAN job! Saw the video and it rips. Nice job man. (I'm tdwp3 on youtube)

[Chronic788]

Thanks!

[Schven79]

Thanks!

You actually inspired me to build one.

[Spider-TW]

Well done!

The stuffing in the grip is the hard part isn't it?

[Chronic788]

Quote: Originally Posted by Chronic788 Thanks! You actually inspired me to build one.

Cool! Good luck on your build!

Thanks Spider! Yes, the grips are a little hard to close so that they dont pinch the air line but its manageable. But changing the battery is quite the operation lol

[the123]

Nice mod, I want one now!!! The way my Ego eats batteries when it's sitting in the gear bag is criminal. I hope you get good at changing it.. Also get a longer macro line so it's not in the way of your fingers.

[Schven79]

Cool! Good luck on your build!

I guess since I'm not trading my Pneumag I'll get started. I won't be using my Pneumag though.

[TeamBob]

usually like me guns to have some flash and flare, but i really like this. Nice and Clean. Great looking build bud

[Chronic788]

Nice mod, I want one now!!! The way my Ego eats batteries when it's sitting in the gear bag is criminal. I hope you get good at changing it.. Also get a longer macro line so it's not in the way of your fingers.

Thanks! Yea the batteries seem to just evaporate when theyre just sitting in there. It gets expensive.

Lol you just called my next move: Ive been searching for a longer macroline in all my local stores but none seem to have them... i guess ill just have to order it offline.

I guess since I'm not trading my Pneumag I'll get started. I won't be using my Pneumag though.

Sweet. Be sure to take pics of your progress along the way: its cool to look back at them. BTW the best place for the pneumatic parts is www.airsoldier.com. They've got everything you'll need.

Plus it took me forever to find a connector to solder to the solenoid but I finally found one here: http://www.akalmp.com/kits.html Its the two-pin connector labeled "CON-2-PIN/LEADS" on that page. I'm pretty sure that one will fit any ego board but I'm not completely sure. Can anyone else confirm that?

usually like me guns to have some flash and flare, but i really like this. Nice and Clean. Great looking build bud

Thanks! I wanted to go for the sleeper look so its pretty plain. But I liked the black on black so thats what i went with. Im actually about to order some black macroline fittings, and some black grip screws to finish it off.

[Schven79]

Yeah I know all about air soldier. I'll be going there first. I don't know when I'll be able to start though...