Moderators: if this was incorrectly classified under Main forum, kindly move to a more appropriate area. Thanks,
This was a letter that I wrote to a customer of a used RT after he threatened to slander my name on AO. His pm appears below the letter. What do you all think?
Dearest Bluvision and Mr Dremel:
I would like you to try to slander my name all over the boards from this transaction. I want you to try to say everything that happened. I'm glad majority of people that have posted here already know your story. So go right ahead. First of all, you did not send me the receipt. Secondly I've already fixed that gun for you free of charge and replaced all the worn parts and overhauled the whole valve. That is why if you didn't touch the damn thing or try to field strip it nothing would go wrong with it. That is why our discussions are over. There is nothing more that can be done with it. As far as you quoting 45 bucks for repairs and all that crap. Speak with Jon AGD to find out how much it's gonna cost. It's impossible for you to have been able to talk to ANY tech at AGD between the time of your first email to me and this pm. Keep heading in the direction you're heading and you may be surprised why I know.
You're playing a childish game. The gun was shipped to you in perfect condition from Tunaman to me.(without being touched AT ALL) You CONFIRMED it was in Great condition and shot well when it arrived. Then all of a sudden you're claiming all these problems and tried repeatedly to have it fixed by someone else, even tho I told you to send it back to me or MaqDoc for repairs. You repeatedly say that the guy you sent it to was an expert that has over 5 years of experience fixing RT's then why couldn't he fix it? Your problem is that you have been told repeatedly not to mess with the gun, primarily since you don't know how to strip it down properly. It's not rocket science but since you keep experiencing the same damn leak, it is all too common a problem from incorrect assembly/disassembly of the RT. Do not begin to threaten me by saying you will slander my name or post here to gain my attention. You speak of a transaction that went down well over 5 months ago. You are lucky that I respond to you at all. You purchased a used gun in perfect working order. Although that was the case, and you invalidated whatever warranty I offered you by having joe schmoe Dremel try to fix it repeatedly with no luck, I had it COMPLETELY REBUILT for you with new orings and internals some of which can be validated by accessing your serial number from AGD.
If you even think you can blackmail me into fixing your gun AGAIN after you AGAIN tried to have Mr Dremel fix it for you unsuccessfully, I'm sorry... it's not going to happen. End of story. Oh by the way, you state just two days ago that you just gassed it up and found the leak... Sorry little snot nosed kid, you received the gun a good two to three weeks ago FED EXED over night to meet your deadline for your supposed tournament and we heard nothing from you till now. Tell Mr. Dremel to keep his hands and Paintball working skills to working on the Talons which I'm sure he does so well.
Don Florencio
This was a letter that I wrote to a customer of a used RT after he threatened to slander my name on AO. His pm appears below the letter. What do you all think?
Dearest Bluvision and Mr Dremel:
I would like you to try to slander my name all over the boards from this transaction. I want you to try to say everything that happened. I'm glad majority of people that have posted here already know your story. So go right ahead. First of all, you did not send me the receipt. Secondly I've already fixed that gun for you free of charge and replaced all the worn parts and overhauled the whole valve. That is why if you didn't touch the damn thing or try to field strip it nothing would go wrong with it. That is why our discussions are over. There is nothing more that can be done with it. As far as you quoting 45 bucks for repairs and all that crap. Speak with Jon AGD to find out how much it's gonna cost. It's impossible for you to have been able to talk to ANY tech at AGD between the time of your first email to me and this pm. Keep heading in the direction you're heading and you may be surprised why I know.
You're playing a childish game. The gun was shipped to you in perfect condition from Tunaman to me.(without being touched AT ALL) You CONFIRMED it was in Great condition and shot well when it arrived. Then all of a sudden you're claiming all these problems and tried repeatedly to have it fixed by someone else, even tho I told you to send it back to me or MaqDoc for repairs. You repeatedly say that the guy you sent it to was an expert that has over 5 years of experience fixing RT's then why couldn't he fix it? Your problem is that you have been told repeatedly not to mess with the gun, primarily since you don't know how to strip it down properly. It's not rocket science but since you keep experiencing the same damn leak, it is all too common a problem from incorrect assembly/disassembly of the RT. Do not begin to threaten me by saying you will slander my name or post here to gain my attention. You speak of a transaction that went down well over 5 months ago. You are lucky that I respond to you at all. You purchased a used gun in perfect working order. Although that was the case, and you invalidated whatever warranty I offered you by having joe schmoe Dremel try to fix it repeatedly with no luck, I had it COMPLETELY REBUILT for you with new orings and internals some of which can be validated by accessing your serial number from AGD.
If you even think you can blackmail me into fixing your gun AGAIN after you AGAIN tried to have Mr Dremel fix it for you unsuccessfully, I'm sorry... it's not going to happen. End of story. Oh by the way, you state just two days ago that you just gassed it up and found the leak... Sorry little snot nosed kid, you received the gun a good two to three weeks ago FED EXED over night to meet your deadline for your supposed tournament and we heard nothing from you till now. Tell Mr. Dremel to keep his hands and Paintball working skills to working on the Talons which I'm sure he does so well.
Don Florencio
BluVision wrote on 02-28-2002 10:13 PM:
I posted on the board cuase you have not answered my e-mails so why would you answer my pm. I judt got off the phone with AGD and they siad it will cost $45 cuase the warrenty is no longer in affect plus my shipping to them. I still need the $15 for the shipping to mag doc and also it is leaking from out of the back again and I have turned it all the way down so I still think it is the frame. If you do not want me putting stuff about the faulty gun you sent me on the message board you might want to answer my e-mails and get the gun fixed quick.
Griffin Hall
I posted on the board cuase you have not answered my e-mails so why would you answer my pm. I judt got off the phone with AGD and they siad it will cost $45 cuase the warrenty is no longer in affect plus my shipping to them. I still need the $15 for the shipping to mag doc and also it is leaking from out of the back again and I have turned it all the way down so I still think it is the frame. If you do not want me putting stuff about the faulty gun you sent me on the message board you might want to answer my e-mails and get the gun fixed quick.
Griffin Hall
And if this individual is reading this post, and you beg to differ w/ my opinion.. you too can email me for I won't be quite so nice in private. Good luck Don.. let me know if there's anything I can do. 
<---Should be banned for circumventing the cuss filter.
Comment