Classic trigger E-mag Video

[fflamingmoe]

This is my first video showing my older E-mag.
This is the gun i use for the field.
I sent alot of people to the dead-box.

http://www.youtube.com/watch?v=PbFsChw5ixU

[maniacmechanic]

no X Mod & on straight E , not hybrid ?

[fflamingmoe]

You got it.
It was only in Semi-Mech
But it took i little but of time to lighten the trigger.
And the spacing.
I think the video even slows down my finger pull a bit.
I fry my magnets but you shouldn't do it.

[ProblemKinder]

what is meant by frying your magnets?

[Ando]

He means he heat them up. They lose their "magnetism" and one other way to tune the trigger then adding orings or what not to the top magnet cavity.

[kcombs9]

semi-mech? i saw the board was on...

[fflamingmoe]

Board is on but old software and not in E MODE.
If you ever tryed to walk the trigger with old software it was pretty stiff.
What i do is use a little sandpapper after to reduce the magnets in half.
But it didn't work too well with other triggers that didn't have beef on the backside.
Update:
This is the rong video
Did anyone hear 1.8 in the video?
This must be after i updated it.
And now i can't fined the other video's.
sorry guy's i thought it was the right video because you can see it's only in Mech.
But you can't see the board too well.
And now i'll have to make a new video
This was the video that was going into the for sale thred to sell it.
But it gave me too many memories to sell her and is not for sale.
I made it when i had 2 E-mags for sale at the time.

[kcombs9]

Board is on but old software and not in E MODE.
If you ever tryed to walk the trigger with old software it was pretty stiff.
What i do is use a little sandpapper after to reduce the magnets in half.
But it didn't work too well with other triggers that didn't have beef on the backside.
Update:
This is the rong video
Did anyone hear 1.8 in the video?
This must be after i updated it.
And now i can't fined the other video's.
sorry guy's i thought it was the right video because you can see it's only in Mech.
But you can't see the board too well.
And now i'll have to make a new video
This was the video that was going into the for sale thred to sell it.
But it gave me too many memories to sell her and is not for sale.
I made it when i had 2 E-mags for sale at the time.

All confused right now, half of what you say in the video is muted so I have no clue what you said.

All I know is if the board is on no matter what the selector switch is set too with old software you cant disable the solenoid when its powered up so even if its set to M-mode with the board on your still using the electronics to fire (this is what they call Hybrid)

Hope you figure it out. Sweet E-mag no matter what mode its shooting in.

[fflamingmoe]

All confused right now, half of what you say in the video is muted so I have no clue what you said.

All I know is if the board is on no matter what the selector switch is set too with old software you cant disable the solenoid when its powered up so even if its set to M-mode with the board on your still using the electronics to fire (this is what they call Hybrid)

Hope you figure it out. Sweet E-mag no matter what mode its shooting in.

Yup your right.
It was my mistake because i had done alot of video's that night.
I didn't have the coffee in me i guess.
I have other E-mags and it didn't dawn on me that the board was on.
But i will do a video of another E-mag with the board off when i buy some other lowers.
I'm also thinking of of another project with a Classic mag.