Centerflag Hyperflow 201???

[tkdmaster]

Hey guys I have a hyperflow 201 reg, and was wanting to rebuild it with new orings etc. The problem is that I cant find anyone who stocks the parts kit for this reg. Not only can I find someone who sells it, but it looks like the parts are nowhere to be found....is this the proper parts kit for the centerflag hyperflow 201 regulator?
http://cgi.ebay.com/Centerflag-Inlin...item3a4d9275a5

[mpsd]

There you go:

http://www.airsoldier.com/mm5/merchant.mvc?Screen=PROD&Store_Code=AOS&Product_Code=CFDYNAPARTSKIT&Category_Code=REGULATORS

EDIT: Sorry, just realized they are out of stock. Try e-mailing them and see if by any chance they can help you out.

, anyways

[longi]

Here are the oring sizes for the 201/301 spares kit I picked up from the 201/301 Dynaflow manual. If you can find an oring dealer they'll sell you them by the 100's for next to nothing rather than trying to source a spares kit that you may never be able to find. All the orings are off the shelf items, so any oring dealer will stock them. Also if you dismantle the reg and take the orings in to a dealer they'll be able to tell you which one you need. Just remember where they go!!

Bottle O-ring 1 .015 URE
On/Off O-ring 3 .08 URE
Black On/Off O-ring 1 .012 BLK
Black Top O-Ring #1 1 .010 BLK
Black Top O-Ring #2 1 .019 BLK
Black Top O-Ring #3 1 .017 BLK
Piston O-ring 1 .012 URE

The spares kit shown is a low pressure spares kit not a high pressure kit. They might be the same though. I also have the 201/301 manual but not the Hyperflow manual I can email you if it'll be any good to you. Pm me if you want it.

[the123]

The Hyperflow IS a 201/301.

Here are the oring sizes for the 201/301 spares kit I picked up from the 201/301 Dynaflow manual. If you can find an oring dealer they'll sell you them by the 100's for next to nothing rather than trying to source a spares kit that you may never be able to find. All the orings are off the shelf items, so any oring dealer will stock them. Also if you dismantle the reg and take the orings in to a dealer they'll be able to tell you which one you need. Just remember where they go!!

Bottle O-ring 1 .015 URE
On/Off O-ring 3 .08 URE
Black On/Off O-ring 1 .012 BLK
Black Top O-Ring #1 1 .010 BLK
Black Top O-Ring #2 1 .019 BLK
Black Top O-Ring #3 1 .017 BLK
Piston O-ring 1 .012 URE

The spares kit shown is a low pressure spares kit not a high pressure kit. They might be the same though. I also have the 201/301 manual but not the Hyperflow manual I can email you if it'll be any good to you. Pm me if you want it.