New APX paint reviews

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hill160881
    fire power my friends

    • Jun 2008
    • 1156

    #1

    New APX paint reviews

    The paint being reviewed is the Cure ball paint order.


    This review is to let APX know how there new paint performs.


    Packaging: 1/10 Very bad, Unbelievable amounts of oil in the bags.

    Bore consistency: good, 2/10, Cronoed pretty consistent. +-10 but was egg shaped and dempled

    Fill: good, 8/10, pasty thick stuff.

    Shell: 1/10 Very bad, It broke in the gun, ALOT, not on the target. It was dimpled.

    Performance: 1/10 very bad, Bad barrel brakes, i had lots of bounces on me that should not have been bounces. Had the first of several jams that day in my hopper, the first in 20K rounds. The shoots seemed to loose any accuracy at a distance.




    Very disappointing when there retail available paints are so good. It was very oily
    Over all i would not recommend that APX puts this paint into production, it is not the worst paint i have ever used but close. There(APX) lowest grade paint is WAY better.

    Rating is a 3/10
    Last edited by hill160881; 01-30-2011, 02:53 PM.
    Fire power my friends.
  • pk5
    Registered User

    • Jan 2006
    • 608

    #2
    I agree with everything he said.

    The good:
    Abnormally large bore, not something that you see in production any more .691 for a snug fit.
    Thick fill

    The bad:

    Oily fill

    Crappy quality in term of shell, there were many shots that break inside barrel creating a big goopy mess that I am going to start cleaning up (tomorrow). This happen with even the largest bore I have on gun from the RTP Viper to a Viking Valhalla. On the other hand there were shot that bounce off like crazy leaving big giant bruises and I am still not out.

    The great:

    Build in Apex effect, I mean over long distance these curves like no tomorrow. Tight bore and a freshly squeegee barrel have no impact on this effect, it just does it 9 out of 10.

    Comment

    • koleah
      Registered User
      • Jul 2005
      • 797

      #3
      Originally posted by pk5
      The great:

      Build in Apex effect, I mean over long distance these curves like no tomorrow. Tight bore and a freshly squeegee barrel have no impact on this effect, it just does it 9 out of 10.
      Wait, was this a joke? Or srs?


      There used to be a joke with my paintball friends that because Brass Eagle paint would naturally hook to the left, and Stingrays would naturally shoot to the right, put them together and you'd be spot on.

      Comment

      • SSP REAPER
        FKC Founding Member

        • Aug 2008
        • 1831

        #4
        I used the APX Agro Pro back in October and found the same results. It was very very brittle and spent a whole day spray painting with my emag. It was messy to say the least.

        Comment

        • going_home
          Hebrews 13:8

          • Dec 2004
          • 8343

          #5
          Fyre Competition

          I've had good luck with the Fyre Comp until this last time
          and they didnt do too well in the 19 degree Florida weather
          (blasted Canadians left the door open).

          Comment

          • hill160881
            fire power my friends

            • Jun 2008
            • 1156

            #6
            It is worth saying that after a dozen cases of APX Agro Pro, i did not have a single barrel brake. I have played against there fyre comp and it is the same, it is good paint.


            This new stuff is bad. In fact would APX be willing to take unopened cases back, and swap them out for agro pro?(i pay shipping of corse) Or would they give us a cost deal on the same # of cases we ordered for the event? If neither, it is not a big deal, but i would like to see if APX will stand behind there product. Mainly due to the oil in the bags, This was a screw up from the factory and i consider these boxes of paint defective for that reason.
            Fire power my friends.

            Comment

            • Rudz
              Registered User

              • Apr 2005
              • 5087

              #7
              Really disspaionted, I've shot Fyre and Agro from APX and it did it job

              As soon as I pulled the bags out of these boxes I see this oil everywhere, barrel breaks, ball getting stuck in the breech of my pump, for much of the morning

              Needless to say underboring was not a good idea, I went up in bore size and atleast I could shoot it, albiet not straight, but atleast it quit blowing up in my gun, I plan on drying it all out, then seeing how it works

              One thing I noticed is none of these bags had the silicone packets APX paint usually has, the packets help keep the paint dry, and I believe this was a big part of the problem, from what I've hear talking others, APXs quality has taken a dive recently, and they no longer use silicone packets due to some players not having common sense and silicone packets ending up in hoppers

              When I consider the fact that Hill bought 1/3 of the entire paint order, he should have more of a say then any of us, some of us are left with a couple bags, maybe an extra case, but multiple cases of paint that has to be removed from bags, aired out, dried, then we can HOPE its usable
              Last edited by Rudz; 01-30-2011, 10:47 AM.
              BEO MAFIA
              sigpic

              Comment

              • hill160881
                fire power my friends

                • Jun 2008
                • 1156

                #8
                Well my ego with cure3 bolt did shoot it without braking. It did not fly straight however. So i can use it, with a lot of drying.
                Fire power my friends.

                Comment

                • Rudz
                  Registered User

                  • Apr 2005
                  • 5087

                  #9
                  Originally posted by hill160881
                  Well my ego with cure3 bolt did shoot it without braking. It did not fly straight however. So i can use it, with a lot of drying.
                  Lasrsktr used my ego, and apparently I need the cure3 bolt, lol otherwise it makes soup of this paint
                  BEO MAFIA
                  sigpic

                  Comment

                  • pk5
                    Registered User

                    • Jan 2006
                    • 608

                    #10
                    Originally posted by koleah
                    Wait, was this a joke? Or srs?


                    There used to be a joke with my paintball friends that because Brass Eagle paint would naturally hook to the left, and Stingrays would naturally shoot to the right, put them together and you'd be spot on.

                    No i mean it I still have 2 bags + 2 cases left from this run and i guess the only marker that it is going in is going to be my little brother A5 with over boring.

                    I was playing pump all day and these curves with no reliable pattern at all, about 30 ft out or so it would suddenly curve. Then when i switched to my pneumag it turn into a blender.

                    Comment

                    • vf-xx
                      Henchmen Inc.
                      • Nov 2001
                      • 3311

                      #11
                      First I've heard of this thread.

                      Thanks for the honest replies. Do any of you have unopened stuff left that you can send me pictures on?

                      I'm really sorry it turned out so poorly, that's not what I was told to expect.

                      If you can get me pictures, I'll get in contact with my factory guy and see what I can do.

                      I know I was clear on saying that this was prototype paint, but I was lead to believe that it had already tested very well, so this is very much a surprise to me.
                      -- Feedback--

                      Comment

                      • sniper42
                        Registered User
                        • Jan 2009
                        • 64

                        #12
                        I agree with the above posts. I was having horrible breaks in the morning on my karni pump. I gave some to my friends to try out and they all had similar results.

                        I can get pics, I have a few bags unopened, they will be up in a few.

                        Comment

                        • hill160881
                          fire power my friends

                          • Jun 2008
                          • 1156

                          #13
                          This paper napkin was used to wipe out one bag of paint. Just think how much is on the paintballs.



                          The dimples are present on 1/3 of the paint. The one on the far right has a crease in the top of the dimple, meaning the shell is cracked and it will explode in the barrel.
                          Last edited by hill160881; 01-30-2011, 02:48 PM.
                          Fire power my friends.

                          Comment

                          • sniper42
                            Registered User
                            • Jan 2009
                            • 64

                            #14
                            Snapped a few pics. In the last one you can see the oil that is at the top of an unopened bag.






                            Comment

                            • hill160881
                              fire power my friends

                              • Jun 2008
                              • 1156

                              #15
                              Now for the really bad ones. Two different bags.

                              Fire power my friends.

                              Comment

                              Working...