Valve question..

[sithos]

Guy locally has THIS valve


on this gun



Its 100% factory, still has the original box and whatnot.

I'm wondering if:
a.) its just a normal x-valve that had lasering done to add the RT-Pro stamp
b.) if there would be any changes needed to run a ULE body
c.) is it worth more/less than a regular x-valve.

Appreciate the help.

[Chrome]

a) No. It is an ordinary x-valve from an earlier run when the lasering was like that.
b) Other than removing the twist lock pin from the rail, no, the ULE body will just bolt on. If the valve has a level 10 bolt, it might need to be retuned.
c) The only change in value compared to another x-valve would be from someone looking specifically for that lasering on the valve to finish a project.

[punkncat]

Make sure that has the LX in it as well. That was the first run of the all aluminum valves replacing the previous RTP, which were equipped with Lvl 7 bolts.

Otherwise, as was mentioned they aren't really any different from the X valve.

If that happens to be one of the Lvl7 RTP X valves, I would be interested in trying to pick it up from you. I have been wanting to put a lvl 7 bolt back into my Karta. With a reloader B I really don't need the lvl 10 bolt, I need more efficiency.