I have redsigned my pump kits. Any one that has got a kit in the last week or so will be getting the new kits which I'm now out of at this time. The mounting block and pump guide rod are now one peice. This elimantes the need to extend the mounting block out the front of the rail for the pump rod threads.The mounting block has been dovetailed on top to match the rail angle. The mounting blocks now come setup for direct mount or ASA/ foregrip and come with the screws and nut for doing either setup. The nut is is stainless steel as is the pump handles reataining screw and bolt push rod.
I will be attending LL4 Saturday so I will be running a special for pump kits and milling. Pick up your kit and/or milled body and rail at LL4 and save. I will post info on deal in my dealer thread.
Lastly I have been doing a project for TwilightG. He asked me to convert a CCM frame to a mag. The mod came out pretty good. I will be offering to do this conversion for others. The frame needs to be milled for the mag sear and the stock CCM trigger needs to be modified to work with the sear rod. Info for this will also be posted in my dealer thread.
I will be attending LL4 Saturday so I will be running a special for pump kits and milling. Pick up your kit and/or milled body and rail at LL4 and save. I will post info on deal in my dealer thread.
Lastly I have been doing a project for TwilightG. He asked me to convert a CCM frame to a mag. The mod came out pretty good. I will be offering to do this conversion for others. The frame needs to be milled for the mag sear and the stock CCM trigger needs to be modified to work with the sear rod. Info for this will also be posted in my dealer thread.
, Good work man!!! 
Comment