Ninja SHP Regulator Input

[bpsimpson22]

So those of you who have one, what do you think? How is the recharge rate? Would you only recommend using it for RTing? Would you use it on a pneumag? Or with a ULT trigger on/off? I'm curious what your thoughts are before I purchase one of these regs.

[FOOGLEMAN]

I will be testing mine tomorrow on my E-Mag ( currently stuck in mech mode... Damn you old battery packs!) and i'll post my findings when i get home

[bpsimpson22]

Cool let me know. See I have a smart parts max flo adjustable reg that I set to about 900 psi to RT like crazy. So do I really need this reg? I do need to replace one of the regs on one of my other tanks. So I'm not sure if I should get the ninja SHP or the regular ninja adujstable reg that goes up to 850 psi. I want to primarily use it on a pneumag or a ULT trigger x-valve. Anyway, I've heard good things about these ninja regs and I'm ready to give ninja a try.

[FOOGLEMAN]

Mags like higher pressures, if you gotta replace an old reg, get ninja to reg swap and hydro your tank, (It's fairly cheap as well)

We'll see how I run tomorrow, then I can be less vague

[need4reebs]

i have 3...2 of the new 1100psi Adjustable SHP regs with the AGD logo and a preset 1100psi and they work great! havent had any problems so far! the reg swap/hydro is the way to go if you pick up a cheap tank! good luck to ya dood!

[shooter311]

I use mine with my Emag, and xvalve with ULT and it works great on all of them. I highly recommend it. There is no doubt it is worth the $50 they charge for it.

I'm not sure if you have seen the review, but this might help:

http://www.youtube.com/watch?v=1ZJhX7CFaPk

[IrishRedneck86]

Hey man I currently run a 950 psi reg they made for me last year before the SHP line was official, and I ran it on my PTP Mirco Emag and it Rt'ed just fine and now I currently use it on my Pneumag and it loves it I can make a video tomorrow at the field with my pneumag and also my my fellow refs stock ule thats set to rt like mad.

[bpsimpson22]

YES VIDEO PLZ! I want to see it rip on a pneumag.

[spearmint]

Where I can buy this stuff. At Ninja site I can't find this

[shooter311]

Where I can buy this stuff. At Ninja site I can't find this

I believe there is a thread in the dealers forum. If that doesn't work I got mine through compulsivepaintball.com

[bpsimpson22]

I'm sure you can get them straight from Ninja. Or check ANSgear.com, cause they got em.

[spearmint]

Thanks guys

[2BAD4U]

Where I can buy this stuff. At Ninja site I can't find this

http://www.ninjapaintball.com/index.asp?vm=r

[BenoitOWN]

Where I can buy this stuff. At Ninja site I can't find this

Call Ninja or order from a dealer(im a authorized dealer)

[spearmint]

I contacted one of you through MCB
But thanks anyway.