Gauging interest in AM and RTP mount foregrips

[luke]

Automag mount>


Two 10-32 screw mount>


Both would come with Lukes Customs milled in the side along with some kind of "side milling".
Both are gas-through.


......A.............B............C...........D

[Ravenneon]

I like the look of these. I was actually thinking about something like this for my minimag.

[AutoFiend]

I'd buy a couple

[OPBN]

You know I'm in for two. My one question is how deep is the groove on the top? It looks rather shallow.

[luke]

My one question is how deep is the groove on the top? It looks rather shallow.

It's about 0.100"
Depth really shouldn't be an issue, it's only there to keep the fg from spinning. If it's tight it wont go anywhere.

EDIT: The fillet on the side did steal some of the depth of the dove tail cut; I made the adjustment to deepen the mount.

[OPBN]

It's about 0.100"
Depth really shouldn't be an issue, it's only there to keep the fg from spinning. If it's tight it wont go anywhere.

EDIT: The fillet on the side did steal some of the depth of the dove tail cut; I made the adjustment to deepen the mount.

Ok, i realize its only there to keep it from spinning, but aesthetics are important as well. Adjustments look better.

[AutoFiend]

Have you decided what kind of side milling might go on these?

[Smokee_2_7]

Any idea how this would look with a dallara body? I thought about using one for a project gun sitting on the workbench.

Carl

[OPBN]

Any idea how this would look with a dallara body? I thought about using one for a project gun sitting on the workbench.

Carl

That was my intended use.

[luke]

Have you decided what kind of side milling might go on these?

Do you want me to decide? If that is the case I choose to do these>>>

......A.............B............C...........D

[robander3]

I like them, I may be interested in one pending the price, one of the middle ones most likely. for the RTP
-Rob

[OPBN]

Middle two are what I am after. An alternate design would be something similiar to the CNC Emag battery cases. Something to flow with the Dallara body would be awesome.

[luke]

I like them, I may be interested in one pending the price, one of the middle ones most likely. for the RTP
-Rob

Price would be the same as the others (MM).

[luke]

Something to flow with the Dallara body would be awesome.

Hit me with a .XFA or .sldprt file of the body and rail and I'll take a look. :)

[OPBN]

Hit me with a .XFA or .sldprt file of the body and rail and I'll take a look. :)

If I had a clue what either of those are, I would.