Fresh from the annodisers

[need4reebs]

HO LEE CHIT! between you and HILL i dont know what to save my money for!!! yall got some skills...haha...very nice werk!!!

[renie]

well it shoots,but ive runout of paint

http://www.youtube.com/watch?v=EKXhXuZnqGo

[Loguzzzzzz]

Here is my old pneumag/egomag setup:

Palmers Fatty


Also had a Palmers Stab Dual tapped for HP input/outputs.


The palmers fatty was rock solid and would suggest that to anyone looking.


I love the way you used the EGO vert ASA.

~Steven

Those look awful familiar!

[Spider-TW]

Nice renie!

If you take pictures again, how about one from the front or back? That looks interesting the way you have the sides flushed up.

What is the story with the two screws in the back of the frame? Just separate frame and valve screws?

[renie]

Nice renie!

If you take pictures again, how about one from the front or back? That looks interesting the way you have the sides flushed up.

What is the story with the two screws in the back of the frame? Just separate frame and valve screws?

will do mate :) yes the back one is just a frame screw it justs tightens it up nice :)

[renie]

[renie]

internal pics

[GEE TEE]

Glad you managed to get it shooting ok with a bit of fiddling last night

Hopefully we'll be able to fine tune it on Sunday?

GT

[hill160881]

I would guess the trouble is with the location of the ram. As high as it is hitting the sear arm it is probably making it inconsistant. Thus the need for the spring on the sear arm and it may cause reset issues down the road. If not that is a good idea for pneumags of all sorts.

[renie]

the problem i was getting hill was it was skipping a shot or 2 on high rof but imnot sure if that was my bottle again not recharging the valve quick enough?? ive put the return spring in just in case but will try on another bottle on sunday :)

on another thought it could be my dwell setting may be a bit high, ill haveto check what the virtue board is set at

[hill160881]

Set the dwell at 15-18ms. I can run mine as low as 11 ms but that will cause excessive sear where. You want the on off engaged keeping the sear down and out of the way of the bolt untill the bolt has finished its backwards travel to prevent it from riding on the sear.

[renie]

how many shims in my ult do u think?

[hill160881]

I don't use them so I dont know. The ult is a pain in the arss. Haha.

[renie]

ha ha, its all i got :) gonna try new bottle 1st then add a couple of shims

[renie]

all sorted now :) 3 shims in the Ult dwell at 9ms, just run out of air so no Vid untll later, but man i wouldn't want to be on the receiving end of this badboy :)