Ninja SHP

[magguy87]

Just for everyone's info, ANS gear has Ninja SHP's on sale for 39.95 right now. I don't know how long it will last. All I know is that i am not happy considering I just ordered one from them over the weekend at full price. I wonder if i can get them to refund the difference? If you don't know about the SHP... It is a Super High Pressure regulator basically made for Automags. Here's a link to the review of it.

http://www.youtube.com/watch?v=1ZJhX7CFaPk

[mostpeople]

heard Ninja's have issues with recharge.. is that true?

[magguy87]

heard Ninja's have issues with recharge.. is that true?

I'll let you know when i get mine in. Doesn't appear to be a problem in the video though. I think if you skip to around 3:00 in the video you can see it in action.

[Spider-TW]

heard Ninja's have issues with recharge.. is that true?

With the shims out for 950 psi, it RTs two of my x-valves, both at 14 bps. One is ULT and the other is RT on/off. I didn't bother with the 1100 psi setting. It's not quite as fast as the max-flo inline imo, but I try to keep it playable anyway. I can run for a bunker while hosing others off with one hand, so not much problem there.

One thing I've noticed swapping shims around in my three different versions; setting the bottle just 200 psi over your HPR setting doesn't work well (shot inconsistency). I go for at least 300 over with my low pressure markers and it's all good.

[M98Punk]

Snag n I was just about to share this... I get over the plauge and good things happen... now to catch up on all the BST that was stockpiled in my room

[Hook]

With the shims out for 950 psi, it RTs two of my x-valves, both at 14 bps. One is ULT and the other is RT on/off. I didn't bother with the 1100 psi setting. It's not quite as fast as the max-flo inline imo, but I try to keep it playable anyway. I can run for a bunker while hosing others off with one hand, so not much problem there.

Ditto. My SHP is also set at 950 and my Tac-One RTs at 14-16 bps, while my RT Classic seems to cycle a bit faster. Very consistent, no recharge rate issues whatsoever.

[Spider-TW]

Ditto. My SHP is also set at 950 and my Tac-One RTs at 14-16 bps, while my RT Classic seems to cycle a bit faster. Very consistent, no recharge rate issues whatsoever.

I think it (the rate) also has to do with the bolt spring. Both of mine are using older gold springs and shooting around 270fps. I think a stiffer spring might bump me up one or two bps.

[BenoitOWN]

39.95$ is not a sale it the new MAP price of the reg.

[BenoitOWN]

I got the real answer: the 39.95$ price is a clearance price to sell old stock as a newer version improved got out.

Since im at the paintball extravaganza

[RST]

sucks....

[Spider-TW]

I got the real answer: the 39.95$ price is a clearance price to sell old stock as a newer version improved got out.

Since im at the paintball extravaganza

Any improvements besides the o-rings and maybe the spring (pack)?

My brass top 3k is only a few years old and does good. I haven't seen "new" vs "old" rebuild kits yet.

[BenoitOWN]

Quite sure it will have their new 360degree adjustment(3 set screw to lock in place). Still use the same rebuilt. Will have the new spring type.

[OPBN]

So my SHP reg is obsolete before I even put it on?? crap.

[fierymartel]

LOL, mine too! Just ordered it last Friday. Oh well, it will match the Retro valve I'm using as opposed to an X-valve

[M98Punk]

I have two now, one is for a friend, the other will be on my 35ci tank for my mag rifle when it gets finished... Have to deal with the evils of a cocker before I can fall back on the simple awesome nature of a mag