Anyone ever used these detents?

[Hobbez]

Click me!


Curious if anyone has tried these on a ULE body. ANS has these in colors, but I've never used anything but AGD stock detents. Thought I'd ask here before I buy a set. Thanks.

[Justus]

I've not used them before, but I think I've seen them on a ULE body. If you look at the black detent: http://www.ansgear.com/Custom_Produc...etentblack.htm the lone review is from a guy who says he uses them in his ULE Automag body. He gave them 5 stars, so I'd say it works.

[Automag ReTro]

I've used them with success. Thumbs up from me.

[splat15k]

I've used them with success. Thumbs up from me.

Same here.

[Ando]

They work. Be careful not to screw them in all the way. They are easally blown. You'll need a fat oring on them

[OneSelfLost]

They work. Be careful not to screw them in all the way. They are easally blown. You'll need a fat oring on them

I can second this, I had one last me all or 5 minutes because it was screwed in too far. Otherwise, thumbs up, I like them. Use a fat Oring like Ando said, and maybe even a drop of blue (BLUE!) loctite to keep them from traveling with vibration.

[TwilightG]

I can second this, I had one last me all or 5 minutes because it was screwed in too far. Otherwise, thumbs up, I like them. Use a fat Oring like Ando said, and maybe even a drop of blue (BLUE!) loctite to keep them from traveling with vibration.

Third.
I have a pair of these on my pneumag. I use just a dab of blue loctite to keep from unthreading and only screw them in just enough. Since I'm using dual-detents, I don't really need to screw them in very far.
If you are only using one, be sure to use a fat o-ring

something else worth mentioning, these do stick out from the body a bit. It will look like horns sticking out the sides of your mag.

[Tropical Life]

"fat o-ring" they work fine as others have stated.

[Frizzle Fry]

BEWARE!

ANS, ANSGear, ANSExtreme and BarbsPB sell KNOCKOFF Custom Products parts.

Buy from somewhere else!

[maniacmechanic]

BEWARE!

ANS, ANSGear, ANSExtreme and BarbsPB sell KNOCKOFF Custom Products parts.

Buy from somewhere else!

2nd

[elgalloblanco]

If you get the real CP detents, they work great. I've been using the same one on my pnuemag now for about 2 years and no problems.

[C_losjoker]

"fat o-ring" they work fine as others have stated.

anyone know the size and where to buy the fat oring. CP has the detents on their website but does not show any other oring options.
thanks