EDUCATE ME ON WARP plz

[PaInTbALL zAcH]

Can someone help me out. Im young and dumb and I would like someone to show me pictures of the sensor and how to adjust things and why do I want to adjust adjust things and that junk. PLZ

[magic55]

ya i know how you feel. i had problems with mine when i got it and just hooked up intellifeed to take care of that, then when i got my new gun i just gave my warp to my brother cause i had no mula to get him anything

[Load SM5]

This helped me out a ton.....

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=97&CATID=6

[PaInTbALL zAcH]

Ok i understanding everything except where the heck is the sensitivity adjuster?

[hitech]

When first setting up the warp:

Take the black cover off the back and that will expose the circuit board. Turn the small blue knob all the way clockwise. This will start the warp spinning. Let it run for 5 minutes or so. Then start turning the blue knob counter clockwise until the warp stops spinning. This is the most sensitive setting. Try it out and see how it works. If it spins to often when you don't want it to, back off on the blue knob a little. That should get you started. The manual explains the dwell settings well. I started out with the factory (longest) setting. Next I'm going to try the next shorter setting.
Good luck.

[Load SM5]

Here you go. Turn this to adjust the sensitivity.

[PaInTbALL zAcH]

thanks guys i got it now