Powder coating SS valve

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • TimmyJay
    I came to play...not talk
    • May 2007
    • 779
    #1

    Powder coating SS valve

    Any issue with powder coating the SS valves? Will thickness of coating cause an issue?
    Tags: None
    • athomas
      Of course it works-its AGD
      • Jan 2002
      • 8039
      #2
      It can affect the operation. Anything that alters the distance from sear to on-off pin or alters the position of the valve or body on the rail can adversely affect the operation of the gun.
      Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        • M98Punk
          NYOG President
          • Nov 2002
          • 656
          #3
          You need to put it in a rail and tape it off so you don't mess up the tolerances
          Girls are no substatute of paintball

          Murphy's law of paintball: If it jams force it. If it breaks it needed replacing anyways

            Comment

            • luke
              lukescustoms.com

              • Jan 2001
              • 8211
              #4
              Originally posted by M98Punk
              You need to put it in a rail and tape it off so you don't mess up the tolerances
              QFT

                Comment

                • river031403
                  Registered User
                  • Feb 2011
                  • 1080
                  #5
                  powder coating

                  baking of the parts in powder coating is done at low temps. So masking off the area of concern would take care of the tolerance issues.
                  http://www.automags.org/forums/showt...errerid=144073

                    Comment

                    • knownothingmags
                      RKM 3D Designs

                      • Apr 2010
                      • 4810
                      #6
                      Originally posted by luke
                      QFT
                      he does this, powdercoating you speak of.
                      logoRKM 3D Designs

                        Comment

                        Previous template Next
                        Working...