help me finish my RPG mag

[keiko_819]

so im almost done with my 'dust catcher/finger print device' but all i need is a on/off asa, i was going to put a cp mini rail and on/off but the way the chimara frame curves down at the bottom makes it look funky...any one have any ideas for a nice asa(preferably on/off style) that would fit, something smaller than the standard cp direct mount im thinking, also im missing one grip screw, does someone make gloss black ones or do i have to just stick with the aluminum ones from the hardware store, still looking to put a pariah body on it but i figured i'd play with it some til then...thanks

[C_losjoker]

have you looked into the dye or empire on/offs? also might look at dangerous power, i think they have one that would flow with the look.

[wetwrks]

You might look at what I did with mine (back when I still had it...kicking myself now). It was a short drop forwards that had a bit of curve to it. Matched up pretty well. Felt good. Just about the right length.

[knownothingmags]

so im almost done with my 'dust catcher/finger print device' but all i need is a on/off asa, i was going to put a cp mini rail and on/off but the way the chimara frame curves down at the bottom makes it look funky...any one have any ideas for a nice asa(preferably on/off style) that would fit, something smaller than the standard cp direct mount im thinking, also im missing one grip screw, does someone make gloss black ones or do i have to just stick with the aluminum ones from the hardware store, still looking to put a pariah body on it but i figured i'd play with it some til then...thanks

you could alway cut your own drop forward/back out of billet bar,
with a nice jig saw, and then file and sleak it out.

in my personal opinion a good flow is hard to get with a 90* frame.
but a little good metal working and hand crafting will get you where you want to be,

,
KNM

[keiko_819]

Another option for me would to put my stiletto drop and angled Asa just to keep some angles going but what I really wanted was a small sleek asa to make it flow...may just have to go with a mini Asa tht is non on/off..

[knownothingmags]

Another option for me would to put my stiletto drop and angled Asa just to keep some angles going but what I really wanted was a small sleek asa to make it flow...may just have to go with a mini Asa tht is non on/off..

if you can draw a quick drawing in paint, to the effect of what you want,
and send it to me in a PM, i can try my hand at some cad for a drop forward/back for a cp ASA,
if all else fails i can use my metal work skills and make something for you.

hate to hand craft when a machine can do it for me , but if it is easy to make i can pull the tools out to work something for you.

,
KNM.

[river031403]

Boblong cam drive

Boblong cam drives come in gloss black with nice milling

[maverick13]

I put a bob long on mine

[OPBN]

I have a BL gear drive on two of my 90*s. They tend to be hard to find in polished black though.

[keiko_819]

so im pretty decided on the bl cam drive and use a cp pro mini dovetail rail, but for $40 on the asa and $20 for the pro mini rail im going to have to hunt for used, after all its not going to be sitting on the wall ...thanks

[river031403]

so im pretty decided on the bl cam drive and use a cp pro mini dovetail rail, but for $40 on the asa and $20 for the pro mini rail im going to have to hunt for used, after all its not going to be sitting on the wall ...thanks

I have one check pics on your wtb thread