max flo regulator

[keiko_819]

anyone got a exploded view or know the best way to take it apart, my on off lever doesnt stop air flow so im just trying to get it fixed...thanks

[NU_METAL]

Here's the link enjoy

http://www.zdspb.com/media/manuals/maxflo-mfi.JPG

In the future i would ask TECH questions in the tech forum
the one that's rite below this one on the forum home page

Heres the home page for ZDS paintball

http://www.zdspb.com/tech/misc/manuals.html

[keiko_819]

thanks NU_METAL...

[Ando]

anyone got a exploded view or know the best way to take it apart, my on off lever doesnt stop air flow so im just trying to get it fixed...thanks

Once you replace the oring in there (very tiny one in the cavity of the on/off). When you go to turn on/off the air, you need to bring the pressure down as far as it can go. That oring will go bad again if you don't bring the pressure below 400-600 psi. Turning it off at the 1200-1500 psi that is't capable of going to will ruin it again and you'll be back in the same boat. Smoothing out the hole on the on/off will help a lot but it's only a bandaid fix and the oring will eventually blow again.

Edit: Oring 5 is the one you need to replace.