Well I'm sure some of you remember this trigger from Dan's video where he had most of his Emag covered in towels. There was alot of discussion about perpetual motion and all that stuff that is way over my head. He sent it to me after the amazing results I had with the first one that was spring assisted. At first I had problems getting it to do anything as it seemed the magnets were not strong enough. I talked to Dan and he also mentioned that maybe a light spring in conjunction with the magnets would help. After testing the spring assisted trigger I knew the spring tension was considerably higher than you might think to overcome the force it takes to trip the sear. Anyways I tried a few light springs to no avail and decided that wasnt the route to go. After about a month now it dawned on me that the magnets inside a Prophecy loader for adjusting the clutch were fairly strong. I found the extras they send with the loader and glued a set on the trigger last night on top of the original magnets that Dan had in place. Well as you will see the results are amazing, at least I think they are. It may not be perpetual motion but its damn close.
-
Thanks,
Jeremy -
Well alright! That's exactly what I was hoping for. You gotta stop teasing us and do a video with some serious air pressure and paint.
What fun.
Dan@Triggernomics -
agreed paint or ban
sigpicComment
-
Off to shop to get scuba and tanks filled again later today. I think I will have something special for you Dan in the next video.Thanks,
JeremyComment
-
Heres the first video of the trigger as it came to me from Dan. It has just one set of magnets on it and in electro mode I could not get it to react at all. I switched to hybrid mode and the board was set to Hyper. I would say that most of the work being done at this point is solely from the RT effect.
Thanks,
JeremyComment
-
Huh, I remember people saying it would not work. Maybe I should finish off the other two prototypes I started.
I can't wait to see more.Comment
-
I remember that also Dan and well, I hate to say it for you, but told u so, told u so. Its pretty cool that it works in electro. Its like RT effect without any higher pressure input needed.Thanks,
JeremyComment
-
Wow, the results with the prophecy magnet is amazing!
Do it!Originally posted by Maghog
It is easy to say "This won't work!" Glad you proof them wrong - period!
TOYYYT LIKE A TOYYYYYGER my feedbackComment
-
So its basically EZ-Mode RT? That is quite nice.March 2014 Classic MotM winner - RT Classic
Comment
-
walk onto a field with that and a helmet cam and start recording reactions
"wtf is that"
"ref, he's using modes"sigpicComment
-
-
What is the output of your tank reg? I wonder if this will allow the RT to happen at a higher ROF with a lower input PSI.March 2014 Classic MotM winner - RT ClassicComment
-
I am using a standard 850 psi output tank and since the gun is in electro it does not rt. It only fires what the board tells it to fire. I also use my adjustable reg set at 1200 psi for the hybrid setting on the gun and the hyper setting on the board. This uses the rt effect and the board combined for crazy rates of fire.Thanks,
JeremyComment
-
I noticed it was on electro mode the second time I watched the video. The first time was on my phone and I had the sound off. Thought it was in Mech mode.Originally posted by kwik175March 2014 Classic MotM winner - RT ClassicComment
-
Well its finally here just so I dont getted banned. Paint + air. Im shooting at a tree in the empty lot next to me which is right in the middle of town. Most of the balls hit the business next door which usually gets me in trouble. Oh well. And just for you Dan plenty of air at about 1400PSI.
Thanks,
JeremyComment
Comment