Magnetic Enhancer Production Model

[kwik175]

Well the time has come to see how much interest there is in producing these triggers. The production ones will not be as intricate or decorative as the previous one that I have shown you. They are simpler in design but none the less the same in function. Maghog was very generous in building these prototypes and I will be getting them built if the AO community wants them. This is not a pre order and will get done when I get the time. I am funding this on my own which is why I just want a count of how many people are interested. I would estimate the cost to be around $200. So if you are not prepared to spend a significant amount of money on a fancy trigger, then dont sign up. I will reduce the cost if I can get them produced for less. Here are the pics of the new ones which are not complete yet. They lack the magnets as I cannot install them before reproduction. The only videos I have are of the previous model. Here it is:






And heres the video link:

http://www.youtube.com/watch?v=qprEvZNpdVI

The magnets in the new trigger will be recessed into the trigger and will not stick out the way they do on the prototype. The trigger is milled for the return magnet and drilled and tapped for the HES magnet. I will start a list below.

[kwik175]

1. hill160881
2. need4reebs
3.
4.
5.
And so on.

[knownothingmags]

who is milling these for you?

[kwik175]

I have spoken to Luke and XMT when we started on this a few months ago and both were interested. I am not sure of their workload and am looking local to find a machinist that will help out. I have no timeline yet. I have some adjustments to make to get them to fit just right so the mode selector will work properly. Really just looking for any interest. Im not even going to bother a machinist until I see a demand for the project. Honestly it doesnt matter to me or Dan, I have some one off custom triggers that are amazing. We are just trying to share with the community.

[zondo]

I want to see a video in hyper mode!

[kwik175]

I want to see a video in hyper mode!

Heres the link. I switch to Hyper mode for the second and third hopper once the scuba is attached. Getting about 25 BPS which is all my Rotor seems to feed. I now have a Spire so we will see if its any faster.

http://www.youtube.com/watch?v=iWmfxU5ZDbY

[need4reebs]

Awesome man!!! just awesome! hope this gets as much AO support as possible!!! Maghog is tha Man!!!

[AGD]

That design is BRILLIANT!! Bravo! Best thing I have seen in a long time.

TK

[kwik175]

Well there you have it. And I'm pretty sure this guy ^^^^^^ would know. Thanks TK.

[knownothingmags]

so from what i gather from this post and the previous ones is this trigger is only good in emode or hybridmode?

other then that it is unpredictable in manual mode?

and there is only one trigger to pull information off of?

how many of the triggers you make will be tested in full?

not to be a nay sayer, but full testing of all triggers need to be done before these come to light.
due to the component of this trigger.

EDIT:
i could be totaly off base on this.
who knows.

[knownothingmags]

with the crapiness of post 10 aside,
i would like one of these, hell 10 of them for each of my e-mags.
but...

it would take me way to long bring together the time to buy these or to get the cash to order these.

[kwik175]

Well to answer your first question, yes the trigger works in mechanical mode. How well? Depends on your valve and how reactive it is. I will post video soon of the new trigger as soon as it is ready. I am sort of busy right now with the holidays. As for testing all the triggers made: sure I could test them for fit on my emag but that doesn't mean they will work in yours . I can't predict any differences in valve setup, trigger rod length, mode selector switch tolerances, any of it. The trigger works in my gun. That is what I know. And here is the best part about me not being a legit company trying to make money: I can decide who really wants to tinker with a trigger and make it work for them . These triggers will need to be setup individually for each gun. Everything you need will be included. But even if you wanted 20 of them KNM, I still wouldn't sale you one. I just dont need the money.

[renie]

even if you wanted 20 of them KNM, I still wouldn't sale you one. I just dont need the money.

Ouch!


$200 for a trigger

[hill160881]

I am curious how this would work with an inteli frame and a ULT X-valve.

Think I will put my name down for one if I may.

[need4reebs]

Can i get tha #2 spot please? thank you sir!!!