Official AO PumpMag picture thread

[OPBN]

Hey AO! Let's see your PumpMags! In addition to nice clear pictures, let's try to give specs and any interesting info about the marker (Anodizer, person who did the milling etc) to help others identify that special part they are looking for, but don't know the name of

I'll start:

pumpmag.jpg

Specs:
Polished MiniMag Body - Milled by Luke
XM15 PUmp kit - Modded to accept RTP ASA
Benchmark trigger frame
Cherry contoured panels (unknown brand)
Capped and devolumized Classic valve with inline Bob Long Torpedo regulator. Cap made by MCB member Deus Machina
Redz Clamping feedneck
Freak back/front
Trinity Center outlet ASA (not shown)
Rail pump and ULE milled by Luke. Anodized by Ano Tech

[captian pinky]

ule
ccm feedneck
taso splash kit with frame
rainman pump kit
xvalve with lvl10
sp gadget grip
ul

[Loguzzzzzz]

Mine. . . . .





. . . .and here is a project that was never completed.

[Ando]

Just "finished" building this one this past year.

*Link not working...I'll fix it later*

Also...still hunting down parts for all of them.

[GEE TEE]

Here is my pumpmag. XM15 kit, classic valve, polished rail, 32 degrees grip frame and CP direct mount ASA. Was running the polished MM body until recently, but it now has the aluminium vertical feed XMT body. I'm currently sourcing enough parts to build a second pump.

[BigEvil]

A little different now then when this was taken but you get the idea..




and then there is this guy too..

[Justus]

Just revised my pump and now I need my rail milled a little bit more (went from a Tac body to a Minimag body, and now I need a rectangle milled). But when I get it done and can take a pic, I'll post a pic. This spot reserved.

[rseb4agze]

These are all my past pumpmags that I have built:
Centerfeed Minimag


CF Stockclass


ULE Pumpmag

Ying & Yang:

Current project: Chord pumpmag "under construction"

[need4reebs]

Me Babies

here are my nicest pump mags so far:






.....one day ill finish the Nasty Pump Mag!!!!!

[cougar20th]

My purple Pumpmag,
This is the 2007 Motm picture. I built in in around 2002 and cant say anything has changed on the 10ish years since I built the gun. Still fun as hell to use.

Its really a simple build as far as parts are concerned nothing to exotic.
AGD Purple Rail, AGD PumpKit, AGD highrise powerfeed pump body, Minimag Reverse valve, Benchmarks Triggerframe, Kapp Angel 15* vasa, Benchmark Dropforward, Kapp forgrip, AGD purple Minimag barrel, CP on/off, Kapp grip panels

My VSC Pumpmag.

AGD valve Lvl 5, Modded Minimag ( I do this), CCI Phantom Feed block & tube, Taso rail, Benchmark Vasa, CCI 12 gram changer, CCI T stock, Cerberous pump Kit. AGD Crownpoint barrel (short), Dye frame & grips.

[BTAutoMag]

I was about to comment on Ando's syd-pump...

but this thread is soo full of epic that singling pumps out is HARD

[OPBN]

I like where this is heading so far. Thanks for all the great posts. I would personally like to see more in the way of descriptions though. One of the things that always disappoints me is when someone posts up an awesome marker and I can't ID one or more of the components and there is zero in the way of description. It might help newer members or those thinking about building a PumpMag to know exactly what they are looking at and/or who did the work. It might also generate some business for those people.

[Arstron]

Here is my current pump mag.

[need4reebs]

I like where this is heading so far. Thanks for all the great posts. I would personally like to see more in the way of descriptions though. One of the things that always disappoints me is when someone posts up an awesome marker and I can't ID one or more of the components and there is zero in the way of description. It might help newer members or those thinking about building a PumpMag to know exactly what they are looking at and/or who did the work. It might also generate some business for those people.

thank for making this thread dood!!! i put tha descriptions in the tags section under each Mag for that same reason! i wanna see some more ULE rails man...mini shadow, mini wave, dallara...where ya at warp...we need some more ULE rail pump inserts made!!!

[keiko_819]

ule body w/rpg subzero feedneck, classic am/mm rail, classic polished valve w/hardline to ptp trashcan vasa , rainman pump kit, cp mini gas through, on/off, and mini rail, intelliframe...nothing too crazy but it shoots straight...