LPR Foregrip

[luke]

These are wide, think Emag battery pack, narrow rails will reveal the top part of the FG. They can probably be mounted on most rails but you will see the top.

[BLachance75]

So about how much wider than a RT Pro rail with something like your praxis or zayan milling.

[luke]

.010" on either side. (Less than 1/64") on the Praxis.
Looks great on the Zayan too, shows just at more, but these sides are tapered. Really looks great though.

[C_losjoker]

I think offering this as a plain foregrip is excellent idea.

[luke]

If you guys want a foregrip only option, you can discuss it here. So far I've had two requests and they were both different. We need to settle on what the FG will be.

[BLachance75]

I would prefer a gas through cut in the same shape, no LPR internals. I would even go for a plain nongas through.

What was the other suggestion for a fore grip?

[zondo]

Yes two piece.

I will consider doing a gas through fg as long as it does turn into a bunch of changes and modifications and deviate from this project.
It's going to be heavy.

Do you have a screen shot of the two pieces? Curious how this is assembled...

[knownothingmags]

Do you have a screen shot of the two pieces? Curious how this is assembled...

top and bottom,
you can see where the 4? screws will go in up top.

[need4reebs]

These are wide, think Emag battery pack, narrow rails will reveal the top part of the FG. They can probably be mounted on most rails but you will see the top.

so will these fit a AM/MM rail or will they stick out past the front of the rail?

[luke]

It is designed to mount on the AM rail, but just like an EM battery back it will stick out.

Picture posted with stock AM rail, see 1st post.

[BigEvil]

I might have missed something.. but where does the input hose go in?

[luke]

where does the input hose go in?

Bottom line, tucked inside a cavity.

Pressure adjustment from the bottom too.
LP line out the top under the rail, hidden.

[BigEvil]

Bottom line, tucked inside a cavity.

Pressure adjustment from the bottom too.
LP line out the top under the rail, hidden.

I approve of this post

[need4reebs]

It is designed to mount on the AM rail, but just like an EM battery back it will stick out.

Picture posted with stock AM rail, see 1st post.

bummer man? thats a lot of over hang for a AM/MM length rail? oh well?

[luke]

bummer man? thats a lot of over hang for a AM/MM length rail? oh well?

Sorry man "form follows function". This reg design dictates the size and with all the variables and covering as many bases as possible, this is what you get. I think there is way more going on than most people understand. I had to make allowances for this being a low production part, I just can't squeeze more out of it at this point.

The only option at this point would be a new AM rail.