max-flo reg help

[Chencho]

hi, just quick questions about the SmartParts MaxFlo regulator (Tank reg)

whats its min/max output pressure?

difference between 4.5k and 3k? (other than the air capacity...)

any other tank can be used with it, or need a specific tank?

tnx, the faster the better... my mag is asking for a adj. regulator

just want to hit maximum tuning to make it as silent as possible, and also for RT (by changing output pressure).

[athomas]

Any tank will work. The threads are standard threading.

The min/max output pressure depends on the spring kit and piston that is installed. There is a high output version and a low output version. The high output version works great for mags, but the low output version won't allow you to get to high enough pressure. Its not just a matter of changing the piston and spring. The back section is changed as well, to accept the smaller diameter piston for high pressure operation.

I don't think there is any difference between the 3k and 4.5k versions other than the safety pressure reliefs.

[Chencho]

The min/max output pressure depends on the spring kit and piston that is installed. There is a high output version and a low output version.

theres a high and a low version for all 3 versions, right?

sorry for bugging to much, just want to make sure I ask the right questions before buying one.

thanks

[athomas]

Check this out:

http://www.zdspb.com/tech/mguide/regs/comparison.html

http://www.zdspb.com/tech/mguide/regs/faq.html

[Chencho]

Check this out:

http://www.zdspb.com/tech/mguide/regs/comparison.html

http://www.zdspb.com/tech/mguide/regs/faq.html

thanks!

thank you guys!