Nice little ULE

[Mole1119]

Just threw this together tonight from some parts I have been collecting and nice Logic UMF that I found on Bacci



I think i am going to try tune this into an RTing beast. I have only used a maxflo once and then realized that I did not have a great way to depressurize the line. Any one have any good tips. I have seen slide checks mentioned before but I have always thought they were a little bulky.

[dboggs79]

Shut the air off and dry fire a couple of times.

[Mole1119]

I was using macro and I couldn't pop it even after dry firing

[Sk8ermog]

Good question. I was going to do this with my set up that I was going to put a Max Flow on. I was going to use macro as well. Have you tried letting it sit for awhile and see if the air just seeps out the valve? There must be just enough pressure to keep the macro on, but not allow the gun to fire. Have you tried using something small like a flat head screw driver to put the sear back into the frame to help clear the valve on/off? That little bit of air might be a problem for me so I'm interested in what you do.

[Fred]

If you don't want the bulk of a slide check you could look into a proconnect.... Macro is not ideal for a high pressure rt set up anyway, goes boom quite dramatically. Braided line ftw!

[need4reebs]

pro-connect or a toxic toys venom high line deluxe with a slide check. cant go wrong with either of those. tha pro-connect will definitely be alot easier to find tho!


high line deluxe:

[Mole1119]

Originally I hooked this up on my x-mag and I wasn't trying to boost the pressure just get the valve tuned and that's when I ran into the issue. I ended up using one of my screw in tanks and letting this one sit. When I put this together it reminded me of the problem. I am kind of just curious to see what people have come up with. It is going to end up with braided at some point.

I will have to check out the proconnect, thanks

[Laku]

I love my Venom Highline Deluxe.

[need4reebs]

I love my Venom Highline Deluxe.

ya see..this guy knows whats up...haha!!

hey Laku any pics???

[Laku]

ya see..this guy knows whats up...haha!!

hey Laku any pics???

Not yet. I'll try to find time to take some during the weekend.

[need4reebs]

hey dood check out these slide checks:
http://www.ebay.com/itm/Paintball-Re...item3a8042bdb1

this auction is for 2 of them...they are very useful for wat your wanting to do as well as for testing pneumags, LPR's...stuff like that.

[need4reebs]

here are some pics using tha slide check in tha link from tha post above w/a Armageddon reg using Macro line...never had a problem w/tha macro line even with the reg cranked upto 1200psi:



and here are a few pics just using regular macro fittings, tha slide check, and a QD nipple attached to a gas thru bike grip:



just slide the slide check back to turn tha air to the marker off, disconnect the line and as your turning tha pressure of the tank down/off slowly bleed tha line with tha slide check:


same setup will work using S/S airlines as well. hope that helps???

[Mole1119]

Nice that is pretty minimalist, I ordered a valve to try and vent the reg directly, I am going to try that first hopefully I get it this week.

[Mole1119]

A little more progress, aired it up and it shot fine.

[need4reebs]

Nice that is pretty minimalist, I ordered a valve to try and vent the reg directly, I am going to try that first hopefully I get it this week.

do you have a link to tha valve you ordered for tha others wondering how to set up their airline?