Rails

[luke]

LOL. An 'RTP style rail' indicates it will use an RTP sear and an 'AM style rail rail' will use an Automag sear and ASA.
If I'm making slugs in both AM and RTP styles 9.1" in length, one could make the asumption that they can be cut to a shorter length, no??

[dboggs79]

What about milling for a banjo bolt?

[luke]

What about milling for a banjo bolt?

That's not something I have looked into, what do you need, a side port with a hole drilled into the valve bolt hole?

[dboggs79]

That's not something I have looked into, what do you need, a side port with a hole drilled into the valve bolt hole?

Yeah. Larger hole obviously for the banjo bolt itself, and an inlet port on the side. Talked to you awhile back about having another rail milled to fit a RT Classic. Might change gears and go this way if its something you'd be interested in doing. I can send you the stock rail for dimensions if you want.

[Ando]

I would def be interested in a am/mm tac rail

[luke]

I would def be interested in a am/mm tac rail

That should not be a problem. I've been thinking about adding Tac rails to the inventory in both AM and RTP rail versions.
I need a Tac body in order to line up the machining on the rail if you can loan me a body.

[luke]

Yeah. Larger hole obviously for the banjo bolt itself, and an inlet port on the side. Talked to you awhile back about having another rail milled to fit a RT Classic. Might change gears and go this way if its something you'd be interested in doing. I can send you the stock rail for dimensions if you want.

I'm sure we can add it as a mod, there is no real difficulty doing so.

[luke]

Got the AM slug rails made, I believe these will be the first ones ever available in the same length as the RTP.





I'll start putting a plan together for a run of rails.
My initial thoughts on designs will be a revamped version of the Beta rail in both RTP and AM versions, both longer in length than has been done up to now. I will try and design a notch-less design for use with ULE Warp bodies.

Second, I'll do the flat sided rail like the Shadow rail, that can be pump milled and no bump-out around the sear pin head.

Third, I'll do Tac rails in AM and RTP. (I need a body to determine layout of machining)

I plan on making a bunch of slug rails so I can work in more designs. Everyone likes the 3D cut and carved designs so I will work on some new designs after the initial project is started, but they wont be included in the initial run...

[knownothingmags]

im up for a slug of both, considering price of course.

[luke]

You want the slugs as is?

[knownothingmags]

You want the slugs as is?

yes please.

[BTAutoMag]

I'm always scared with his requests like this

[luke]

yes please.

PM sent...

[knownothingmags]

I'm always scared with his requests like this

who would have guesed luke had an old Alcoa extrusion factory at his disposal.

[Patron God of Pirates]

OK, here's a RTP sear style slug rail ready for production.






Next is the AM style sear slug rail, first ones will be the same length as the RTP rails at 9.1" long.
I'll work on the programing tomorrow, then I'll cut the prototype and then we will do a quick production run of custom rails.

Woah! How to make a Mag look like an old shoebox shocker! I might be down for an unmilled RTP version once buyingMagStuffIDontNeed season starts again (Feb.2014)