NEW!!! Carbon Fiber XULE Bodies!!!!!!!

[Xmagterror]

I guess I didn't consider how they are assembled. I think I may have read his OP wrong, I thought they could be easily changed

The back tube will be glued on for safety but the front tube can be changed. Once you tighten the body down to the rail they will not move.

[Laku]

The thing that breaks the aesthetics for me on the single piece body is how the feed neck sits little higher and that its attachment is angular when everything else in the body is rounded and flowing. That's why I voted for the two piece body.
I wonder would it be possible to make it lower profile and more flowing if it used something like empire sniper feedneck?

Having said that, I do appreciate the aesthetics of the rest of the body quite much. And the ingenuity of getting the breach to fit and work inside CF tube is just marvelous!

[BigEvil]

http://i182.photobucket.com/albums/x291/bridgemach90/IMG_20140101_161808_zpsdbbi6qeh.jpg[/IMG]

90* air fittings

[SoulCoffin]

I'd be interested in either body, but also in those fittings

[Xmagterror]

The fittings will be avail this spring.

[Xmagterror]

Very Nice Work!

I have the same question as TyeStick, would you be able to produce a CF pariah body? I would be happy to send you my pariah body if you needed a model for measurements on the front cut. Thx Joseph.

Thats just a body thats the same length as an AM/MM rail with a slight angle on the front? If so,yes thats no problem

[Levi]

The fittings will be avail this spring.

Do these fittings swivel freely while pressurized?

I've had an adjustable/folding tank mount idea floating around in my head for a few years... needs a swiveling air fitting though.

[Xmagterror]

Yes...and they swivel butter smooooooth! LOL

[Levi]

Yes...and they swivel butter smooooooth! LOL

Perfect!

Then count me in for a couple sets. Will you be doing a pre-order for them?

[Beemer]

Yes...and they swivel butter smooooooth! LOL

Are they tested for 3000psi.?

[Xmagterror]

They will be rated at 1K PSI..........I have tested them to 7.5PSI with no problems. These are not for the High pressure side of a tank.

[Gadget]

Can you do a nice short version of the body (classic length) as well? Seems a shame to buy something for ultimate lightness, only to have a big chunk of additional body overhanging the front adding weight

[Jkoselka]

My vote is for the two piece, the ability to swap pieces out is nice. The fittings look great too, makes me want to ask if my deposit for the Phoenix body can go towards this instead.

[ElPanda]

They will be rated at 1K PSI..........I have tested them to 7.5PSI with no problems. These are not for the High pressure side of a tank.

I am not impressed by 7.5 PSI...

[knownothingmags]

The back tube will be glued on for safety but the front tube can be changed. Once you tighten the body down to the rail they will not move.

perfect.