Uni-Frame?

[Nobody]

i like the longer PTP gas through design. it offers the air inlet at a level to the ASA, so there are no major bends or kinks, which i like. its that linear approach, and makes it have cleaner lines and moves the macroline away from where your hand can go or grab at it. nice work. i'm sure that when Scott gets it, i'll have some trigger time with it.

[maverick13]

Why chose one. Just buy all the parts. That way you can swap them to whatever you want.

If it's possible to get one frame and the 2 fg, it's certainly what I'll do !!

[Patron God of Pirates]

The first design (with your foregrip) is A-W-S-O-M-E!
Go ahead and put my name on the pre-order.

[cougar20th]

Crappy rendering but each ones taken me 1/2-3/4 hour to do and I dont have the time right now.

This is the frame with the Benchmark foregrip removed. (I only have a small number of foregrips available). Anyway the Vert asa is made so any gas thru foregrip/reg/expansion chamber will thread into it. A tank how ever will not as there is no pin to depress the tank valve. Hmm gotta look into that.

[Spiritchaser]

That foregrip wouldn't happen to be reversible would it?

That thing turned around with the finger ridges cleaned off would be perfection

[maverick13]

For me it will definetely be custom foregrip + vert asa + benchmark fg !!!!!

[OPBN]

To be blunt, I hate the foregrip as much as I love the frame. As with everything... depending on cost...

[knownothingmags]

Crappy rendering but each ones taken me 1/2-3/4 hour to do and I dont have the time right now.

This is the frame with the Benchmark foregrip removed. (I only have a small number of foregrips available). Anyway the Vert asa is made so any gas thru foregrip/reg/expansion chamber will thread into it. A tank how ever will not as there is no pin to depress the tank valve. Hmm gotta look into that.

these have been fun items to work on.
thankyou again.

[bbotts77]

Pending price, I would probably be interested in one with the vert ASA. I like the flexibility of it.

[debruynda]

Your timing on this is impeccable too...right around tax return time:) I can see one of these going with one of XMT's carbon fiber bodies for a ridiculously light mag setup.

[knownothingmags]

Your timing on this is impeccable too...right around tax return time:) I can see one of these going with one of XMT's carbon fiber bodies for a ridiculously light mag setup.

yeah.

[cougar20th]

To be blunt, I hate the foregrip as much as I love the frame. As with everything... depending on cost...

Thank you. I can understand that. Does the VA seem to be ok?

Your timing on this is impeccable too...right around tax return time:) I can see one of these going with one of XMT's carbon fiber bodies for a ridiculously light mag setup.

Never even thought about it being that time of year.

[BTAutoMag]

Crappy rendering but each ones taken me 1/2-3/4 hour to do and I dont have the time right now.

This is the frame with the Benchmark foregrip removed. (I only have a small number of foregrips available). Anyway the Vert asa is made so any gas thru foregrip/reg/expansion chamber will thread into it. A tank how ever will not as there is no pin to depress the tank valve. Hmm gotta look into that.

that doesnt look like a XMT body... what are you planning here

[cougar20th]

that doesnt look like a XMT body... what are you planning here

Its not a XMT body. The body in the rendering is a abandoned project. I was working on designing a ULE Minimag body. Then XMT came out with his first. So I stopped. No need for 2 of them on the market. It would only hurt sales of both.

[BTAutoMag]

^respect^