Uni-Frame?

[bbotts77]

Its all numbers. I would have to make a certain amount to hit minimums. But I would have to sell them at a high price per part because I likely wouldn't sell them all.

If there was enough interest in that Yes I can make it. But it would probably be better for someone like Luke to make for the amount of interest.

That makes sense. I could always have something printed out of plastic, since it would be purely cosmetic and not structural.

[cougar20th]

If you guys want a angled one or something like a RT one I can modify my CAD. I can check with my plastics guy to see if he would want to make these parts.

[maverick13]

On my side the original design is perfect (or almost prefect).

I don't like angled foregrip it's not natural for my hands, I've only one on my toxic/airwalk mag and it's only for the "look".
Usually I like the RT foregrips but on this specific projet, I fear it would be too fat regarding the slim line of the "rail".

But, that's just my thought.

[knownothingmags]

I can make these parts for you if you are not going to put air through them.
pm me anyone interested and we can talk.

ill need to get the file and test print. and see how it comes out and such.
but if its anything like the one I just do we should be good.

pm me if you have interest in this.

[cougar20th]

To clarify knownothingmags is referring to Foregrip adapters. I can CAD them up when I have time.

[knownothingmags]

To clarify knownothingmags is referring to Foregrip adapters. I can CAD them up when I have time.

yes this only, just the Foregrip adapters.

[need4reebs]

any chance you could do the internal LPR like the G-force frames…that gives you more room in the frame?

[Spiritchaser]

Price pending of course, I'd want a modified handgrip if you'd consider doing one for me. Failing that, I'd want an asa adaptor. I've no interest in the benchmark.

Man I hope we get our bonus this year

You once mentioned that talon triggers might be an option. Is that still likely, or would that now be too many choices?

[cougar20th]

Ill be honest I'm unfamiliar with the workings of the G force frames.

Price pending of course, I'd want a modified handgrip if you'd consider doing one for me. Failing that, I'd want an asa adaptor. I've no interest in the benchmark.

Man I hope we get our bonus this year

You once mentioned that talon triggers might be an option. Is that still likely, or would that now be too many choices?

One off parts will incure a small design fee, and will not be Aluminum they will be printed plastic by knownothing mags. He has final say on part price and timeframe.

I'm thinking at this point I would rather use a trigger of my own design then outsource the parts.

[Engineer86]

I was looking through this thread and i use a company called solid concepts ( http://www.solidconcepts.com )to print metal parts all the time you are limited to Stainless Steel Inconel and Titanium, but if you want them to do some finish machining to a cad file or drawing they can do that to. If you are looking at their services and want info on metal printing look for their DMLS product (Direct Metal Laser Sintering). they usually turn plastic parts around for me at work in 1 day and metal parts are usually only a week and their prices are very reasonable for small projects. good luck with this project.

[knownothingmags]

I was looking through this thread and i use a company called solid concepts ( http://www.solidconcepts.com )to print metal parts all the time you are limited to Stainless Steel Inconel and Titanium, but if you want them to do some finish machining to a cad file or drawing they can do that to. If you are looking at their services and want info on metal printing look for their DMLS product (Direct Metal Laser Sintering). they usually turn plastic parts around for me at work in 1 day and metal parts are usually only a week and their prices are very reasonable for small projects. good luck with this project.

thanks for the vote of confidence.

[maverick13]

Nothing new about this project ?

[cougar20th]

With Knownothings situation its been slightly delayed. He is making me the test prototype.

Once I have that there will be some pictures of the prototype then testing. There is just enough changes that I want to make sure it works perfectly before opening a pre-order. Scott (BigEvil) is doing the testing and he has no problems telling me if it sucks or not.

Sorry for the delays.

[maverick13]

Don't be sorry for that, there's no hurry ! I was just coming to the news !

KNM has to recover health first, that's the most important.

Take all the time you need for testing, that's the waranty to get a nice and perfectly working frame

[knownothingmags]

im sending the stuff to you today keith,
email me you addy again, I have it but not sure if ill find it.

I hope the finish on the parts is what you were asking for if not I can do it again.
but they came out great.
I think they are Purdy.