Uni-Frame?

[cougar20th]

im sending the stuff to you today keith,
email me you addy again, I have it but not sure if ill find it.

I hope the finish on the parts is what you were asking for if not I can do it again.
but they came out great.
I think they are Purdy.

Thanks. Make sure its not gonna be a issue for you to get them out. I can wait if your not up to it.

Im sure whatever finish you managed is fine. Im only checking function. I only wanted pretty for the pictures and Im sure everyone here will understand if something not perfect looking.

[Patron God of Pirates]

couger, I just want to confirm that this run is reasonably definite (presuming that the testing works out and you can fill a pre-order). I'm planning a build around it that includes XMT's CF main body. So I wanted to check the status of this before I got on that pre order. Also, do you have a final plan for the foregrip?

While I'm blabbering, you are in NH correct? If you need an RTP or X-Valve platform to test these on I can lend you one (I'm in MA). I don't want to step on BE's toes, but it might be easier than shipping back on forth to Jersey.

LMK.

[cougar20th]

couger, I just want to confirm that this run is reasonably definite (presuming that the testing works out and you can fill a pre-order). I'm planning a build around it that includes XMT's CF main body. So I wanted to check the status of this before I got on that pre order. Also, do you have a final plan for the foregrip?

While I'm blabbering, you are in NH correct? If you need an RTP or X-Valve platform to test these on I can lend you one (I'm in MA). I don't want to step on BE's toes, but it might be easier than shipping back on forth to Jersey.

LMK.

As long as testing turns out good and a preorder can be filled. At this point I think I will need 15 ordered.

I appreciate the offer for testing but I rather use BigEvil for testing. With his knowledge he can spot a problem really quick.

[maverick13]

I'll be for one, sure, I've the same project as PGOP with the XMT CF body (I already ordered mine ! ) !!!!!

[cougar20th]

Also, do you have a final plan for the foregrip?

Sorry missed this. The I have a new version of the original foregrip. Much better.

I also have a VA that will accept any standard asa threaded foregrip. I have a very limited supply of Benchmark foregrips I plan to offer if they come apart nicely.

There will be a fairly complex options/pricing sturcture for these so those that want certain parts can get what they want.

[Spiritchaser]

Forgive me if this has already been answered but: the hole behind the trigger; is that for a pneumag MSV-2 actuation rod?

[cougar20th]

Forgive me if this has already been answered but: the hole behind the trigger; is that for a pneumag MSV-2 actuation rod?

Correct the 1/8" hole is for the actuator rod

[robertreed711]

Maybe I am alone in this but I would like the foregrip mounting area to be as wide as a standard rail so that other foregrip options are more compatible. Imagine trying to put a DW CF grip on it or something like an RPG stick grip. They would look out of place on that skinny rail.

Just my $.02

[knownothingmags]

Maybe I am alone in this but I would like the foregrip mounting area to be as wide as a standard rail so that other foregrip options are more compatible. Imagine trying to put a DW CF grip on it or something like an RPG stick grip. They would look out of place on that skinny rail.

Just my $.02

it sure would,
but that's why I can,
if I get enough interest to print stuff up for you to put those types of things on that rail so it doesn't look to out of place
but im sure cougar20th with go into that some more.

no air option though on my parts

[cougar20th]

Maybe I am alone in this but I would like the foregrip mounting area to be as wide as a standard rail so that other foregrip options are more compatible. Imagine trying to put a DW CF grip on it or something like an RPG stick grip. They would look out of place on that skinny rail.

Just my $.02

To go with a va area that wide I would need to start with a chunk approxamitly 1 1/4" thick. Most of that would get milled down to 3/4" thick. Some smaller. The cost of the material is a issue. But the cost to cut it dowb is more of a issue. Machine times not cheap.

The other reason it was done thin was because the design is to eliminate the rail. To have a small wide rail in the front wouldnt accomplish that.

If its something that got enough interst i can design a adapter and KNM can print the for people. Ive already descussed that with him am he is willing to do it. He will not print anything intended to hold pressure.

[knownothingmags]

To go with a va area that wide I would need to start with a chunk approxamitly 1 1/4" thick. Most of that would get milled down to 3/4" thick. Some smaller. The cost of the material is a issue. But the cost to cut it dowb is more of a issue. Machine times not cheap.

The other reason it was done thin was because the design is to eliminate the rail. To have a small wide rail in the front wouldnt accomplish that.

If its something that got enough interst i can design a adapter and KNM can print the for people. Ive already descussed that with him am he is willing to do it. He will not print anything intended to hold pressure.

you are the man

[TimmyJay]

Make sure it is wide enough to cover the boss area around the front screw hole on the ULE bodies.

[knownothingmags]

Make sure it is wide enough to cover the boss area around the front screw hole on the ULE bodies.

lol you are telling him how to design stuff.
just messin, he has it covered trust me.

[TimmyJay]

Just didn't know what bodies it would be tested with and they all seem to have different cuts leaving a potential for a gap. It is less noticable with the standard feed ULE, but this was the only picture I had handy.

[Levi]

Make sure it is wide enough to cover the boss area around the front screw hole on the ULE bodies.

Just pulled apart a couple mags to compare, and wow! I never realized there was such a difference between the vert and warp bodies.