Uni-Frame?

[knownothingmags]

It doesnt work... sorry..




all mine :)

you cant do worse then my prototype end test. lol
unmeasured pressure test. I hit it with a hammer to see how the layer splits.
then all stuff that isn't good gets shredded and scraped, garbage.
dot have the facility to recycle my print scrap.

[need4reebs]

got em. one sec
http://i741.photobucket.com/albums/xx60/thetoolishere/Untitledxx_zpsb3fd2a89.png
http://i741.photobucket.com/albums/xx60/thetoolishere/Untitled9_zps87699271.png
http://i741.photobucket.com/albums/xx60/thetoolishere/Untitled8_zps2d4902ea.png
http://i741.photobucket.com/albums/xx60/thetoolishere/Untitled7_zps702430e9.png
http://i741.photobucket.com/albums/xx60/thetoolishere/Untitled6_zps626ab1a9.png
http://i741.photobucket.com/albums/xx60/thetoolishere/Untitled5_zpsec50efb4.png
http://i741.photobucket.com/albums/xx60/thetoolishere/Untitled4_zps4334d288.png
http://i741.photobucket.com/albums/xx60/thetoolishere/Untitled3_zps0becbc71.png
http://i741.photobucket.com/albums/xx60/thetoolishere/Untitled2x_zpsb7007ea5.png

HO LEE CHIT!!!! KNM actually printed something…haha!!!

[robertreed711]

Weren't we supposed to have some assembled pics from bigevil at some point?

[Xmagterror]

Thats very cool to be able to print your cad file to make the prototype.

[cougar20th]

Yes, Ive had some delays. But I believe I forgot to adjust something in the prototype. Been messing with it. Still going to send it to BE. But think I need to run thru one more prototype.

[BigEvil]

Weren't we supposed to have some assembled pics from bigevil at some point?

I got the triggers yesterday.. still waiting on the rest.

[BigEvil]

[Spiritchaser]

The one on the left looks awesome, the one on the right might be good too.

If ordering logistics and cost allow, I'd probably order a couple

Obviously not an issue for plastic triggers but for the metal ones, have you considered the possibility of increasing the trigger pivot OD to allow purchasers to add a thin wall delrin (or similar) bushing in there without the wall getting creepy?

[cougar20th]

The one on the left looks awesome, the one on the right might be good too.

If ordering logistics and cost allow, I'd probably order a couple

Obviously not an issue for plastic triggers but for the metal ones, have you considered the possibility of increasing the trigger pivot OD to allow purchasers to add a thin wall delrin (or similar) bushing in there without the wall getting creepy?

The one on the left is NOT for this frame. Its another project altogether. There is no way it will be for the Demon frames. It was just sent to B.E. for testing at the same time.

The one on the right is for the Demon frame.

Theres no need for a delrin bushing. These pivot just fine when made of aluminum.

[Spiritchaser]

The one on the left was a surprise, it looks a LOT like one I'm currently carving out for a pneumag. Yours is a bit deeper fore-aft than the one I'm making, wider too I think, mine is only 1/4"

The plastic isn't so much for friction as for feel... Not sure how to describe it. No big deal in any case thanks for the reply

[knownothingmags]

Thats very cool to be able to print your cad file to make the prototype.

yeah it is, that's why im here. lol

[BigEvil]

Working on it..

[DarkApollo]

That look awesome........

[cougar20th]

The pictures great. It shows the height difference well. From what I recall the shift up is 1/2" - 5/8" I would have to check the model for exact.

Note: the front foregrip mount is not on the prototype. It will be on the final.

[knownothingmags]

The pictures great. It shows the height difference well. From what I recall the shift up is 1/2" - 5/8" I would have to check the model for exact.

Note: the front foregrip mount is not on the prototype. It will be on the final.

printer is setup for a lot higher resolution prints . if you need another made, when you get it finished.