What's everyone's go-to LPR

[knownothingmags]

For pneu-mags? The Tickler seems to be unavailable, Palmer of course still has the Micro Rock, anything else you guys like?

from what I understand palmers doesn't sell the "micro" rock lpr on their site anymore.
I could be wrong, but I could not find the micro rock on there anywhere, anymore.

[MAGgot]

from what I understand palmers doesn't sell the "micro" rock lpr on their site anymore.
I could be wrong, but I could not find the micro rock on there anywhere, anymore.

http://palmer-pursuit.com/cart/micro-rock-regulator-p-48.html

[knownothingmags]

http://palmer-pursuit.com/cart/micro...ator-p-48.html

stand corrected.
awesome thanks for the help on that man.

[MAGgot]

No problem. The Palmer site is really difficult to navigate.

[Dirge]

If it does not have to be a sleeper, there are always vertical reg options. I have had good luck with the Torpedo, CP and Palmer Stabilizer's.

[sjrtk]

that can be taken so many different ways.

Yes it could but the micro rock makes up for its small size with reliability and enthusiasm.

[river031403]

How are the smart parts Lprs? Anyone have an opinion on those

[debruynda]

I have a Palmer pebble on my pneumag and always ran a rock on my cocker. Have not had a problem so far with either.

[Spider-TW]

How are the smart parts Lprs? Anyone have an opinion on those

They had some?

[Frizzle Fry]

They had some?

Weird looking ones, for the Impulse.

[Spider-TW]

Weird looking ones, for the Impulse.

The tape worm? I thought those were mostly internal. I missed most of SP's early markers in one way or another.

[river031403]

They had some?

http://www.zdspb.com/tech/mguide/regs/main_miniflo.html

[renie]

Ive got a few of those in my spares there a very reliable lpr I have used them on a sleeper and 2 of my old cockers.
never needed to adjust them once set
Making an lpr is simple the microrock has to be the easiest design no need to be so big though
Ask hill I made a makeshift lpr for him a while back was only 1" 1/4 long and about 0.4 o/d.
Personally Ive found it comes down to decent springs and using a high durometer oring.
size wize 1/2" x 1 1/2" would be a nice size, all you need is a fine pitch thread on the adjustement
which will give you better pressure adjustment.
I so have some cad files somewhere if u want them

[luke]

Ive got a few of those in my spares there a very reliable lpr I have used them on a sleeper and 2 of my old cockers.
never needed to adjust them once set
Making an lpr is simple the microrock has to be the easiest design no need to be so big though
Ask hill I made a makeshift lpr for him a while back was only 1" 1/4 long and about 0.4 o/d.
Personally Ive found it comes down to decent springs and using a high durometer oring.
size wize 1/2" x 1 1/2" would be a nice size, all you need is a fine pitch thread on the adjustement
which will give you better pressure adjustment.
I so have some cad files somewhere if u want them

I have already designed the LPR I'm going to produce, that not the reason for this thread, I'm gathering information for something different.

[renie]

Cool, well if I can help you in any way feel free to ask