Almost there.....

[OPBN]

Pics suck. Batteries died on my camera and not sure when I will get back into town.





Breakdown:

Body: Shortened and bobbed. Lower sides milled. Pump milled. Back additionally milled to accept either a standard or reverse valve. - Most of the milling done in house with hacksaw, files, bench sander and sandpaper excepting pump milling and lower body milling which were done by Luke.
Rail: Bobbed, ULE'd, pump milled, and foregrip hole tapped for threads. Milled to a \_/ shape. - Most of the milling done by Luke.
Valve: Capped reverse Minimag.- Cap by Deus Machina.
Pump Kit: Unknown aluminum pump handle on AGD kit. Pump handle milled/drilled for weight savings by Luke. Pump rod homemade out of brass
Foregrip/Reg: Bob Long reg mounted to custom milled VASA. No longer gasthru. - Milled by Luke.
Frame: M86 by Cougar
On/off: NDZ
Fittings: CCM
Feedneck: CCM
Anodizing: ATMF

I still want to do aluminum lines. Just need to get the rest of the fittings in that I ordered.

[ScottyBeans]

Looking sweet! Gotta swap the blue rail out for a dust black one though

[OPBN]

Looking sweet! Gotta swap the blue rail out for a dust black one though

It's all going to ano anyways, so not worried about non-matching right now. Still need to cut up the body some more for the reverse valve. Then hard lines....

[swe_crazy]

Nice one!

[luke]

Changed your mind about that rail?

[OPBN]

Changed your mind about that rail?

No. Still on the fence. You may be receiving another to mill....

[luke]

My Am slug rails have a different profile than the AGD version, that is if your trying to get ride of the side dovetail.

[OPBN]

My Am slug rails have a different profile than the AGD version, that is if your trying to get ride of the side dovetail.

Yep. But it also needs to be shortened in the back, pump milled and uled... Might just live with the dovetail and have the other work done. This is also the one that I had you do the threading for the VASA mount... Ugh. I hate making mistakes....

[cougar20th]

Looks great, I love seeing the M86 getting used. Especially since I know you've only had it a couple hours.

[OPBN]

Looks great, I love seeing the M86 getting used. Especially since I know you've only had it a couple hours.

Yep. I was sitting waiting for it to arrive. It feels awesome. I'll probably take the top set screw out but think the lower will be nice. For some reason from the pics it looked really wide, but isn't at all. Feels really nice in my hands and I LOVE the finger grooves. Very groovy man! Was planning on putting this frame on another build, but like it so much on this that I had to order a second.

[OPBN]

Updated pics in first post.

[El Zilcho]

That is sharp!

[cougar20th]

Looking good. I think I recognize a couple of those parts.

[OPBN]

Looking good. I think I recognize a couple of those parts.

Yep. Once I got the plug out the reg worked great. First time I've tried running the valve on the gauge port. Seems to work fine.

[Sk8ermog]

Looking forward to pics of the other side. Wondering how your air line flows. Did you sleeper mill your ASA and put the air line through the grip or is it just not attached in the pic? I too am piecing together a capped pump. Just haven't decided what parts to use. Don't you hate it when you have enough parts to build 4 mags but you want all the parts together in one mag? LoL