Master list? in one post?

[Runamok]

Hey guy's,
What do you think about assembling a Master list of Resources and sizes for SS or Alum. screws and other parts for Mags. Your one stop shopping source. I have a feeling these are scattered all over the place so we'd just tighten it up abit.
My contribution: http://www.mcmaster.com/library/20140331/90666a016l.gif , SS AM fore grip screw. Pkg. of 5 @ $1.48 ea., and you'll notice they're SS.

[Laku]

Sounds good. Finding that stuff here in Europe is pretty painful considering the rest of the world outside US and Britain use metric system.

[Chrome]

Here is a list that I've put together over time from various posts on AO. Hope this gets you off to a good start.


AUTOMAG SCREWS:

GRIP FRAME to RAIL - 10-32 .968 with .865 threaded, 1" with a washer or cut down (7/8" OAL without washer)
AM/MM VERT ASA - 1/4-20-1/2"
GRIP, ASA - 10-32-various length
SAFETY ASSEMBLY BALL BEARING - 3/32" diameter
SAFETY SPRING - 7+1 coils, closed end, 6 spaces, OAL=0.240" wire dia.=0.015" space between coils=0.0225"
SAFEY SET SCREW - #4/40 no longer than 1/8"
EMAG SELECTOR SWITCH SPRING - 8+1 coils, closed end 7 spaces, OAL=0.330", wire dia.=0.015", space between coils=0.03"
EMAG GRIP SCREW - 6-32 x 1/4"

EMAG SCREEN DIGIKEY PART NUMBERS
HCMS-2912 for Red
HCMS-2911 for Yellow
HCMS-2913 for Green
HCMS-2914 for Orange

[Runamok]

Now we're getting into it. See Chrome gave us nice Tech. on the springs. Useful info for ordering. Another tid bit, I found that old Quick disconnects use the same bearing as the safety, and the flint spring from a bic lighter is the right size for the safety, just cut it down and use a small pair of needle nose pliers to finish the ends. We've all dropped them and I think few of them have ever been found again. The foregrip screw is indeed a 1/4-20 x 1/2" the killer is it's a "low-profile socket head". The pic/desc. at mcmaster.com even gives all the tech. spec.s

Found it: wave spring for pump, www.smalley.com pn.c100-m1

[Laku]

Wave springs from UK/Europe can be ordered from here.

http://www.leespring.com/uk_wave_springs_spec.asp?springType=WS&forWhat=Search

I'll dig up the specific link to the spring once I get home.

edit:
these http://www.leespring.com/uk_product_...&springType=WS