So what's good on/off ASA for Nija SHP v2?

[Laku]

Lately I've been wondering what would be a good on/off asa for Ninja SHP v2, or are there any? That increased flow with ball valve also causes annoying increase in resistance on turning the thing on.

[Syko89]

I use a ccp and it works fine

[BLachance75]

I've used a CP direct mount and a CCM on/off without any issues.

[ninjapaintball]

any asa with a turn knob will be fine and the cp asa are nice.

the problem you are describing is for the pops or dye asa as they use a lever or cam system and if you reduce the output of the reg to 450 which is better for those guns it will activate easily.

[Laku]

Thanks everyone. I'm using the 950psi output as this is my x-valve XULE mag I'm talking about. It currently has proto on/off (with turn knob) that fits the lines of the dye ul frame I have in it. Problem being it's too stiff to be manually turned on, so I have to turn it on and then screw in the tank. Which I don't really like.

CP is one of the asa I'm considering since I can use the dovetail to fit it in. But I'd like to use the best possible option, both aesthetically and functionally. So I was interested in knowing what options I had, that are confirmed to work.

So if anyone has any other asa they're using in addition to those that have been mentioned I'd be really interested to know about them.

[Dayspring]

The Planet Eclipse OOPS ASA is nice, especially the front mounting one.

[blackdeath1k]

I love my cp pro mini on off that is on the cp mini rail. Looks great. Works great. And is tiny.

[Stayhuge]

I love my cp pro mini on off that is on the cp mini rail. Looks great. Works great. And is tiny.

I second this. I use it with an 850 output and it turns with no issue. So I think 950 shouldn't be much different. And they look nice on a pro mini rail.

[OPBN]

I'm partial to the Bob Long Gear Drives. I personally like front outlet on/offs vs side output ones.

[maverick13]

I use CP, Bob long and also Dangerous Power