ULE Body with snap on stock class feed tube?

[zulubravo44]

[skipdogg]

So played for half a day Sunday with it. Shot about 100-200 rounds during live play. The 'Side to side' movement the piece has, did not effect the feeding of balls in any way. I had no issues of any kind. The feed worked great and as expected. It just straight up worked. Very happy with it. Will be making arrangements for purchasing the set up KMM sent me. I will continue to use it. If anything negative, unexpected, etc. happens I will update this post. But going forward if you don't hear from me it means I am happy and all is good!

[knownothingmags]

Got to shoot a little last night.
Installation was a breeze. Snapped it on no problem. Shot about 10 rounds in the backyard. Between each shot I tipped the gun forward about 30 degrees to make sure a ball would roll into the chamber. No misfires, ball breaks, or any issue at all.
This weekend I will play live action with it.
the only thing I noticed after i was done shooting... their is a little side to side play with the piece. the "wings" do not come all the way down to the top of the rail. Not sure if the design called for this for a specific reason. I'm not sure if its a issue either. my only thought are, while playing if the piece does shift to one side, will it effect the balls feeding (shrink the size of the feedneck hole by covering a small portion of it). When i play this weekend ill shoot some balls with the piece shifted on purpose to see if this is even a issue.

yeah I purposely left that side to side play in,
that can be taken up easily enough.

thank you,
and keep the input coming.

[skipdogg]

Got to shoot a little last night.
Installation was a breeze. Snapped it on no problem. Shot about 10 rounds in the backyard. Between each shot I tipped the gun forward about 30 degrees to make sure a ball would roll into the chamber. No misfires, ball breaks, or any issue at all.
This weekend I will play live action with it.
the only thing I noticed after i was done shooting... their is a little side to side play with the piece. the "wings" do not come all the way down to the top of the rail. Not sure if the design called for this for a specific reason. I'm not sure if its a issue either. my only thought are, while playing if the piece does shift to one side, will it effect the balls feeding (shrink the size of the feedneck hole by covering a small portion of it). When i play this weekend ill shoot some balls with the piece shifted on purpose to see if this is even a issue.

[knownothingmags]

at first tinker, it seems pretty damn solid. I was almost worried it was going to scratch my ULE, until I remembered that it was made of plastic. It snaps on very solidly.

if you get dirt or a small rock or something between the part and your ULE it might scratch it, when putting it on and such.

[zulubravo44]

at first tinker, it seems pretty damn solid. I was almost worried it was going to scratch my ULE, until I remembered that it was made of plastic. It snaps on very solidly.

[knownothingmags]

got it yesterday as well. unfortunately i have an un-plinkable back yard (condos).

should be out on the field to test it the weekend after this though; will report back.

I guess my advise is to just do whatever. you break it you break it you know...

[zulubravo44]

got it yesterday as well. unfortunately i have an un-plinkable back yard (condos).

should be out on the field to test it the weekend after this though; will report back.

[knownothingmags]

Got it yesterday, Thanks KNM!. Should be able to set it up and plink in the backyard a little tonight. Then off to the field this weekend. Will post updates after each use.

sounds good.

[skipdogg]

Got it yesterday, Thanks KNM!. Should be able to set it up and plink in the backyard a little tonight. Then off to the field this weekend. Will post updates after each use.

[knownothingmags]

two testers have shipped. sorry they prolly wont get to you guys for play this weekend.
I tried.

[knownothingmags]

Up to you, but if you need someone PM me. I'll be able to test. Also, depending on your time frame, I'll be at Living Legends May 15-17 and can use it as my primary both days.

shoot me your addy and screen name,

** people testing will need a cci tube to thread into this item, this may change if these are offered to the public

I need 2 more people to test.

[skipdogg]

oh now who to send some tests too?

Up to you, but if you need someone PM me. I'll be able to test. Also, depending on your time frame, I'll be at Living Legends May 15-17 and can use it as my primary both days.

[zulubravo44]

oh now who to send some tests too?

I'd love to be a tester, but it'll be about two weeks before I can even think about getting out on the field.

[knownothingmags]

oh now who to send some tests too?