One Legged T-Rex (OLTR)

[luke]

Looking at the "pictures" I see a potential issue. Will the lower machining for the low pressure hose be covered by the grip?
It is hard to tell from that perspective.

No. That does not breach the exterior of the frame. The diameter of that (deep) cut is only 3/8" wide.

[luke]

You cant put the LPR inside because there is no material to tap for the LPR. The bottom of the Intelli-Frame is machined out. take a look at the bottom and you will understand what I am talking about. . . . .

Truth.

I have one idea that I have been kicking around as a solution to that but I am not willing to share it!

Me too, just never had the desire to go there.

[BigEvil]

Looking at the "pictures" I see a potential issue. Will the lower machining for the low pressure hose be covered by the grip?
It is hard to tell from that perspective.

I think the machining is internal and nothing will be opened up outside...at least that's what I take from it.

[Loguzzzzzz]

Looking at the "pictures" I see a potential issue. Will the lower machining for the low pressure hose be covered by the grip?
It is hard to tell from that perspective.

[Loguzzzzzz]

Awesome. Thanks luke. The pictures really help understand what's involved to use one in an intelli.

Hopefully I can snag one once you start taking orders. Since im using an intelli, the "cheatah" is going to be my only option if I want to do a sleaper pneumag, having the LPR inside the grip frame.

Can't wait!!

You cant put the LPR inside because there is no material to tap for the LPR. The bottom of the Intelli-Frame is machined out. take a look at the bottom and you will understand what I am talking about. . . . .

I have one idea that I have been kicking around as a solution to that but I am not willing to share it!

[gotzskillz]

Awesome. Thanks luke. The pictures really help understand what's involved to use one in an intelli.

Hopefully I can snag one once you start taking orders. Since im using an intelli, the "cheatah" is going to be my only option if I want to do a sleaper pneumag, having the LPR inside the grip frame.

Can't wait!!

[luke]

I thought I would post this up, there's a few guys concerned about the machining, figured this would help.

This is an AGD Intelli cut in half, the yellow geometry lines are the sections that require machining. I'll supply a little bracket to mount the valve directly to the Intelli's switch mount.



The large upper section is obviously for the valve body and the smaller lower geometry is simply space for the low pressure hose and hose barb. (Plus it hogs out some dead weight)

Edit:
One for perspective>

[luke]

I did some CAD work on the Intelli frame today and I believe it will work, that is as long as I didn't goof up. I have a frame I'll machine tomorrow if I don't get too side tracked with other stuff...

[luke]

I'm so glad I had to follow the link to know the reference. lol

[OPBN]

I personally like the name, it reminds me of one of my favorite movies back in 2003.

http://movies.disney.com/the-cheetah-girls

I knew it!!!

[luke]

LOL, you put alot more into it than I do. M86=Mechanical 86 degree frame.

Only if it falls in my lap.

Mini Vert, not even a actual vert, its an 86.

[Stedspitcher]

I personally like the name, it reminds me of one of my favorite movies back in 2003.

http://movies.disney.com/the-cheetah-girls

[cougar20th]

I really don't put thought or effort into naming my parts,

LOL, you put alot more into it than I do. M86=Mechanical 86 degree frame.

[luke]

Fanboy- "man that gun rips, what is it?"
Me- "it's an automag"
fanboy- "where the screen"
Me- "no batteries, just mechanical"
fanboy- "wow, why does it shoot so fast"
Me- "it has a Luke's one legged trex mod!"
Fanboy- "Say What?"
Me - "oh yeah"
Call it whatever you want, it going to be the "one legged trex valve to me.

[jame4091]

Fanboy- "man that gun rips, what is it?"
Me- "it's an automag"
fanboy- "where the screen"
Me- "no batteries, just mechanical"
fanboy- "wow, why does it shoot so fast"
Me- "it has a Luke's one legged trex mod!"
Fanboy- "Say What?"
Me - "oh yeah"
Call it whatever you want, it going to be the "one legged trex valve to me.