"Best" low-rise clamping feed neck?

[Merce]

Which is lower, the nano or the violent? And has anyone confirmed the threading on those yet?

[Laku]

Which is lower, the nano or the violent? And has anyone confirmed the threading on those yet?

Both are about the same as far as it goes to being low. And also both work on at least ULE bodies (that I have tested). Nano is little nicer, but they don't make them anymore.

[zulubravo44]

Both are about the same as far as it goes to being low. And also both work on at least ULE bodies (that I have tested). Nano is little nicer, but they don't make them anymore.

Not that it's necessary, but I picked up a violent axe/mini based on this thread and can confirm that it works perfectly on a ULE body. It's about as low as it can get (no gap between the clamping part of the neck and the flattop on the ULE body at all when it's fully threaded).

[Merce]

Not that it's necessary, but I picked up a violent axe/mini based on this thread and can confirm that it works perfectly on a ULE body. It's about as low as it can get (no gap between the clamping part of the neck and the flattop on the ULE body at all when it's fully threaded).

That's awesome. I litterly just ordered one as well based on this and was wondering myself

[Nobody]

Empire uses ICD threads for their feednecks. They are very similar to Angel threads. So you might get lucky and it threads right in. Sometimes it won't go. You are literally rolling the dice.

[Laku]

Empire uses ICD threads for their feednecks. They are very similar to Angel threads. So you might get lucky and it threads right in. Sometimes it won't go. You are literally rolling the dice.

That is true. But as long as you don't force it there should be relatively small danger of doing any damage.

On my experience these two feednecks have gone into ULE bodies with no resistance.

[Nobody]

That is true. But as long as you don't force it there should be relatively small danger of doing any damage.

On my experience these two feednecks have gone into ULE bodies with no resistance.

Not talking about damage, more to the fact that some will go in fine, some will go in okay but loose, some 1 or 2 threads. So you might get lucky or you might not. It really depends on how well or how poorly the threads were made.

[Laku]

Not talking about damage, more to the fact that some will go in fine, some will go in okay but loose, some 1 or 2 threads. So you might get lucky or you might not. It really depends on how well or how poorly the threads were made.

Gotcha. I misunderstood, my bad.

[going_home]

That is a svelte marker there GH! :)

Thanks.

Bought another Violent feedneck on eBay today for the Chord mag.

[Merce]

Got my violent feedneck in. Fit real nice on my xmt ule minimag

[SpyderBoy]

I bought a Violent too. Don't have my mag back yet to see if it fits though... :P
Looks nice! :)

[Merce]

Lol new mag fashion trend

[SpyderBoy]

Yeah... Maggots are a bunch of fashionista lemmings.

[going_home]

Yeah... Maggots are a bunch of fashionista lemmings.

Well....