So I have a agd y frame and it has the dovetail mount milled on the bottom. I want to put a asa wegde on it so the back of tank is up. I found a wegde but it is direct mount on both sides. Is there an adapter for dovetail to direct mount or does anyone know of a asa wegde that is dovetail on both sides.
-
-
Why not just have the dovetail machined off your Y grip? -
That's what I have but I want a asa wegde to tilt the tank up and the only on I found is a direct mount wegdeComment
-
Yes, mill it off and use the direct mount wedge without an adapter.Comment
-
You mean your Y-grip doesn't have holes tapped for direct mount ASAs, even through the dovetail mount?Comment
-
The Y should still have the direct mount holes. Does it not?Comment
-
Ya it does so it should be fine just wanted to know if there is a wedged out there that is dovetail on top and bottom because it would be better to use the dovetail on the frame if its there.Comment
-
That does not mount to the marker by dove tail.Comment
-
I don't think I've ever seen a wedge that mounts via dovetail.Comment
-
It doesnt have to.Originally posted by blackdeath1k View Post
Besides the wedge is nothing more than a rail to mount an asa on, and there are no double dove tail rails made that I've ever seen.
Comment
-
could you not just bolt the wedge to the bottom of the y-grip as normal? just because it has a dovetail milled into doesn't mean you can't use the existing 10-32 mounting holes. just pretend the dovetail milled into the frame isn't there...no big deal. if you're concerned about aesthetics, you can get a black sharpie and color the milled part of the frame black; nobody will notice it from a distance.Originally posted by skier1995 View PostComment
Comment