Since ball breakage seems to be related to bolt speed. Would retrofitting a classic mag with a heavier mainspring and redesigning the taper in the powertube tip to reduce the dwell (and thus blowback) be a viable solution? You would probably have to balance this with the fact that peak barrel pressures would increase from the reduced dwell.
- AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026. Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
Comment