my warp feed is giving me some trouble.
i seem to jam starballs pretty bad is there anyway i can still use starballs/or dry paint with out the warp jamming??? any help would be great if this is to techish let me know i will delete and move it.
-
good traders- agdmagman2001, magdude25,Geoff Noble, than205, X-plosive, speedball4life, CoFFey[NiTrO], Snakebite78, zads27 -
try oiling the disks and the hose
COWABUNGAAAA!!!!! -
i am so confused how this can happen to some people but not happen to others??????? yikes strange???Taking a long needed leave of the sport to finish school and tour the country
b2k3w/pds, vaporized, vapor valve, aka sidewinder, chaos chip, palmer rock lpr, CP barrels, 68/45 hyperflow
B2k3 w/pds and bunch of upgrades for saleComment
-
You can oil the wheels with paintball gun oil.
I don't know If im allowed to say this but I found it quite amusing, it works really well, and it is a legitimate tech tip.
My ex GF and I found out that "wet platinum" a silicone based substance works really well and stays on the WARP FEED wheels forever. If you know what "wet platinum" is.
Those who do know don't get any ideas.Last edited by Butterfingers; 03-21-2002, 03:07 PM.Did you hear about the new european weapons contracts? France is going to make the wooden sticks Spain making the little white flags
Comment
-
Break a ball and put the paint on your finger then prime the warp and touch the wheels to oil them up. That's the easiest way to try to fix that.Chupas
Shakira series YO-Mag. Purple to black fade
Yo Boy for life
Comment
-
I see where you get your name "Butter" fingers!! Was the GF around when you signed up on AO? HEHE
kilaKila V2 Magnetic Suspension Detents for Angel 04 Speed, LED, LCD, IR3's, X-mag, ULE Mag, TAC-1, SFL Emag, NYX Matrix, E-blade, Mac Dev Cyborg, Bushmaster 2000, All other Cocker threaded guns, Shocker, Nerve, Impulse
Kila V2 for Alias...the ountdown is on!
Email: [email protected]
www.kilaproducts.com
AO PM: kilaueakidComment
-
Do you have the aluminum diverter plate or the newer plastic plate?Kila V2 Magnetic Suspension Detents for Angel 04 Speed, LED, LCD, IR3's, X-mag, ULE Mag, TAC-1, SFL Emag, NYX Matrix, E-blade, Mac Dev Cyborg, Bushmaster 2000, All other Cocker threaded guns, Shocker, Nerve, Impulse
Kila V2 for Alias...the ountdown is on!
Email: [email protected]
www.kilaproducts.com
AO PM: kilaueakidComment
-
LOL, na she wasent. But I see how the name fits
I should say Ex-GF. Im no longer with her now, but boy was she "crazy" and "crazy" girls dont make good long term partners. But BOY DID I HAVE FUN! She liked playing with "toys" and i'll just leave it at that...
You can call AGD up and get the wider plastic diverter plate for free.Last edited by Butterfingers; 03-21-2002, 03:12 PM.Did you hear about the new european weapons contracts? France is going to make the wooden sticks Spain making the little white flagsComment
-
umm what is a diverter plate ? maybe a picture would help but i think everything is pretty new like .good traders- agdmagman2001, magdude25,Geoff Noble, than205, X-plosive, speedball4life, CoFFey[NiTrO], Snakebite78, zads27Comment
-
Holy Cow! You did NOT go there! I thought this was a family forum!!!But BOY DID I HAVE FUN! She liked playing with "toys" and i'll just leave it at that...
Nice, I'm off to the umm...bathroom...Comment
-
Here is a link to the Warp Exploded View:
Hey Hitech your starting to sound like me! - AGD
Hitech is the man.... :eek: - Blennidae
The only Hitech LubricantComment
-
ooooh ok yeah mine is plastic is there any other possibilities what it could be?good traders- agdmagman2001, magdude25,Geoff Noble, than205, X-plosive, speedball4life, CoFFey[NiTrO], Snakebite78, zads27Comment
-
It is jaming where the hopper feeds into the warp or in the output to the hose. If it is in the input, you can oil the disks (using paint from a "broken" ball). If the paint is to big you can increase the space between the disks. To do this put some tape on the flat side of the center hub.
If it's in the output then I dunno.
Good luck. Let us know the results.
Hey Hitech your starting to sound like me! - AGD
Hitech is the man.... :eek: - Blennidae
The only Hitech LubricantComment
-
what it is the balls dont actually slip by the disks it just forces them into the other ones causing them to dimple and they break because they are misshapen so i don't know what to do.good traders- agdmagman2001, magdude25,Geoff Noble, than205, X-plosive, speedball4life, CoFFey[NiTrO], Snakebite78, zads27Comment
-
The balls are misshapen. Are you saying the warp deforms your paint?
I was always having trouible feeding all-stars until yesterday when I oiled down the wheels with a little paint fill. It worked better than great all day. And I have the old aluminum plate (did'nt even know about the plastic one)Comment
Comment