Nummech "FireMag" Body

[dwn0414]

So, no rail. Proprietary grip. Got any pics of the grip for it?

[going_home]

Wait, you have to use a proprietary front foregrip with this unibody ?

That would be disappointing.

[alpha_q_up23]

I like that emag users will have a cool little window to look through

[Ydna]

Foregrips are a tricky thing since there isn't a standardized mounting method. I was able to include two options...there's a 1/4"-20 threaded hole coming up from the underside that could be used for a VASA, and there's also a pair of #10 clearance screw holes going down from the top, which uses the same dimensions as the RT Pro brackets (0.650" between holes).
I'm going to make some dummy foregrips in a similar vein as the ones from my N-autococker frames except made for the RT Pro pattern, so they could be used for these bodies or other similar ones. Those will come later though.

Most of our bodies are available as black gloss by default, but raw will also be available for the custom builders.

I still need to make the little steel rings that go inside, so that's the ultimate bottleneck for getting these totally ready to ship out. I'm going to start those next week hopefully. The bodies will come with the steel ring along with a pair of detents (our new rebuildables). You'll need an Empire-spec feedneck for it, and of course we have that too, but I don't want to limit people to that one in particular in case you prefer a different one.

[knownothingmags]

Foregrips are a tricky thing since there isn't a standardized mounting method. I was able to include two options...there's a 1/4"-20 threaded hole coming up from the underside that could be used for a VASA, and there's also a pair of #10 clearance screw holes going down from the top, which uses the same dimensions as the RT Pro brackets (0.650" between holes).
I'm going to make some dummy foregrips in a similar vein as the ones from my N-autococker frames except made for the RT Pro pattern, so they could be used for these bodies or other similar ones. Those will come later though.

Most of our bodies are available as black gloss by default, but raw will also be available for the custom builders.

I still need to make the little steel rings that go inside, so that's the ultimate bottleneck for getting these totally ready to ship out. I'm going to start those next week hopefully. The bodies will come with the steel ring along with a pair of detents (our new rebuildables). You'll need an Empire-spec feedneck for it, and of course we have that too, but I don't want to limit people to that one in particular in case you prefer a different one.

ring with C-clip(AGD way),
or
a steel cup with a threaded hole in the bottom of the body for a setscrew to hold the steel cup from falling out?(XMT way)

[dwn0414]

When are the rebuildable detents going to be on the website?

[Bunny]

Can't wait to see the finished product!!

[Fred]

I was super excited for this, since it's gorgeous.

Then I saw your post on FB about the other 2 designs...

[Ydna]

Yeah I have too many to make...probably gonna run out of blanks ahead of schedule. I also wanted to make the blanks available for other people...I'll almost definitely need to make more.

ring with C-clip(AGD way), or a steel cup with a threaded hole in the bottom of the body for a setscrew to hold the steel cup from falling out? (XMT way)

It's more similar to the XMT bodies by that description. There's a little set screw on the bottom of the body that keeps the new ring from coming loose.

When are the rebuildable detents going to be on the website?

I made different versions (cocker, angel, SP, etc) but the trouble is I ran into an issue with the SP-threaded versions and they need to be re-cut. The AGD ones are ready to go right now, black or silver. You could pick some up with a direct if you'd like, send an email to [email protected]

[Bunny]

Yeah I have too many to make...probably gonna run out of blanks ahead of schedule. I also wanted to make the blanks available for other people...I'll almost definitely need to make more.


It's more similar to the XMT bodies by that description. There's a little set screw on the bottom of the body that keeps the new ring from coming loose.


I made different versions (cocker, angel, SP, etc) but the trouble is I ran into an issue with the SP-threaded versions and they need to be re-cut. The AGD ones are ready to go right now, black or silver. You could pick some up with a direct if you'd like, send an email to [email protected]

Sent you an e-mail this weekend. By the way, any update with those xmag parts I sent you

[captian pinky]

Sent you an e-mail this weekend. By the way, any update with those "xmag" parts I sent you

I wanted to buy that, but couldnt justify it. I know it went to a good home.

[going_home]

When are the rebuildable detents going to be on the website?

http://www.nummech.com/prod_item_detentv2.html

Now !

[Bunny]

[captian pinky]

I buzzed the bat phone....

[Bunny]

I buzzed the bat phone....

It worked. Thx!