New "Threads"

[Strider]

So I finally purchased a new HPA to replace my old Flatline.

My current setup is as such:

Untitled.jpg

Any thoughts on what ASA system would be good to convert to? (Will normally be running a warp)

[captian pinky]

Powerhouse makes great regs. AGD was selling some with agd lasering for awhile. If you do plan to get one make sure you order the haymaker version and get it set to the ouput you want. They are great guys and know what they are doing. Standard output is 400-600 i think so you will want to make sure you tell them the output you want.

I have been running 1 of them for the last 2-3 years now. I have since picked up 4 more.

http://www.airgundesigns.com/Powerhouse-AGD-Regulator-p/agdph850.htm

[going_home]

I'm happy with the Immortal Air tank I purchased (they used to be Air America).

450, 550, 850, 1100 psi output, they will preset it to what you want.

He responds to emails fairly quickly.

I'm pretty sure he will sell just the reg if thats all you want.

https://www.immortalair.com/product-category/immortalite-carbon-fiber-complete-systems/

[trbo323]

Ninja, you can get a user adjustable tank so you can play with what output pressure you want

Their customer service and warranties are fantastic to boot

Want something small and light? I just picked up a ninja sl2 77ci, it's the same external dimensions of older 68ci tanks so it works with 68ci tank covers.

Sent from my Moto Z (2) using Tapatalk

[caylegeorge]

Sounded like Strider was asking about what asa, Lots to choose from - my preference is the later slim style CP Direct Mount asa's.

[going_home]

Sounded like Strider was asking about what asa, Lots to choose from - my preference is the later slim style CP Direct Mount asa's.

https://www.dirtyworks.com/blast-legacy/air-systems/asa/cam-drive-macro/cam-drive-macro-line-black.html

[captian pinky]

If that is the case, then these are awesome.

https://www.inceptiondesigns.com/EZ_ASA_COMBO_p/cgp-0088-pb.htm?1=1&CartID=0

[trbo323]

https://www.dirtyworks.com/blast-leg...ine-black.html

Don't buy from dirty works, that guy is terrible. I'm not sure if it was the gear drive or cam drive asas but people pre-ordered and then had to wait over a year for them last I heard (truth be told I never did find out if people actually got their asas)

Sent from my Moto Z (2) using Tapatalk

[going_home]

I bought several from them, although they were ''in stock'' , with no issues.

Its the only asa I use.

[trbo323]

I bought several from them, although they were ''in stock'' , with no issues.

Its the only asa I use.

I used to work for him, trust me on this, the guy is terrible for the sport. He will say everything is in stock weather he has it or not, he sells used boards and noids as new.

And regardless of what his web page says, it's 1 guy. He gives people the run-around when they ask for a return saying "this has to go to the returns department" then he will do nothing until you start sending him emails again. Seriously, don't support him, I had to take him to court just to get my paycheck and he tried to bully me around in the process to get me to drop the case

Sent from my Moto Z (2) using Tapatalk

[Strider]

Wow, I guess thread subscription isn't working for me. I just got the replies...

Yes, I already bought an HPA, I need to buy a way to put it on my eMag.

[trbo323]

I'm also a fan of cp stuff. I use their mini on/off on pretty much everything but I also run drop forwards so I use a rail asa.

The direct mount is pretty much the same just a little bigger to accommodate the mount setup

https://www.ansgear.com/CP_Mini_On_Off_ASA_s/397.htm

(Scroll down)

They are super easy to rebuild and you can get them in a ton of colors

Sent from my Moto Z (2) using Tapatalk

[Nobody]

If that is the case, then these are awesome.

https://www.inceptiondesigns.com/EZ_...m?1=1&CartID=0

Will gladly second this. The best ASA you can get.