We need more 4.5k Flatline Reg Seats!

[splyncryth]

I have access to a XRD machine. If someone can provide me with a dictionary of compound ratios per value of hardness of all potential material the reg seat could be made of then I can determine what material and how hard it is. Problem is grease and oil and other contaminants will show up too.

[Tunaman]

I guess this needed but I never saw the draw of these seeing there is no degas option....

We ran them for years by just using a Pro Connect to release. It is still a great regulator.

[going_home]

I guess this needed but I never saw the draw of these seeing there is no degas option....

[luke]

I've machined a lot of it will great success

[Xmagterror]

I wonder if you could turn some ptfe on a lathe to make the seals? It's hard but it does have a little give to it.

I have this stuff it's 5/8 diameter
[ATTACH=CONFIG]102789[/ATTACH]

Im not sure. That stuff is like cutting jello.
Maybe with special super sharp tools and a collet setup.
I've got some of that material here too

[luke]

I wonder if you could turn some ptfe on a lathe to make the seals? It's hard but it does have a little give to it.

I have this stuff it's 5/8 diameter

[TnDeathInc]

Need 2-3 myself

[captian pinky]

Unless someone else is doing it.
Would rather just buy them anyways. Lol

I think everyone would rather just buy them. lol
Let me know how i can help.

[Xmagterror]

Ill probably take the project on when i get done moving the shop. sounds interesting, plus i need a bunch of them too.

Unless someone else is doing it.
Would rather just buy them anyways. Lol

[Xmagterror]

Ill probably take the project on when i get done moving the shop. sounds interesting, plus i need a bunch of them too.

[shaunyoung000]

I need at least 3 of these, but am happy to invest in more if we need a batch.

[luke]

I wonder if 90 is hard enough though.

I would contact the company in the link and talk to one the experts, explain to them what the demands are and see what they recommend.

[luke]

Think of the big return you will get for your time and effort, lol.

[captian pinky]

If your making them yourself it's not that big of an investment to experiment.

This might get you started
https://www.curbellplastics.com/Rese...Casting-Resins

Just what i need another project. lol. I will see what i can do about drawing something up.
I wonder if 90 is hard enough though.

[luke]

If your making them yourself it's not that big of an investment to experiment.

This might get you started
https://www.curbellplastics.com/Rese...Casting-Resins