I'm getting an E-mag in about one week and I've been reading some of these threads and I'm a litle confused. I know that the video it comes with and manual will explain it all but I would like to have a little background info to add that too so I can understand it better. how exactly does the E-mag trigger work and how do u adjust it and can u adjust it so far that it wont shoot??thnaks....any info will be greatly appreciated
-
Black Warp Left E-mag #EM00163
emagnum board
14in freak
12v smoke warp w/ interlink
drilled 12v revy w/ JMJ impeller and WAS turbo rev board
shocktech drop
AGD flatline dovetail adaptor
68 3000 flatline
***soon to be***
emagnum body rail
black powder coat
custom grips from Frymarker -
In a nutshell.....
How it fires-A magnet in the trigger is sensed by a Hall effect sensor in the frame when it gets close enough.
You adjust the travel though a screw the top of the frame near the sear.
You adjust the firing point through the magnet in the trigger itself.
And the trigger weight is adjusted through adding or removing magnets in a stack above the trigger.
It is possible to adjust it so close without backing out the trigger magnet so it can't fire. It takes a little messing around but it's not hard.
Congrats on the E-mag. -
is it adjusted pretty good when it comes? I figure it does since its made by AGD.i want it as little and as lite of a trigger pull as possible.Black Warp Left E-mag #EM00163
emagnum board
14in freak
12v smoke warp w/ interlink
drilled 12v revy w/ JMJ impeller and WAS turbo rev board
shocktech drop
AGD flatline dovetail adaptor
68 3000 flatline
***soon to be***
emagnum body rail
black powder coat
custom grips from FrymarkerComment
-
You can set the triggers so it can fire an a vibration right?
.
Good Traders:
Tunaman, K-villeplayer, Magman007, Mastersconi, Jon/xpm, Kenndogg
My feedback if you've dealt with me, leave some...
Fruitcat: it's what AO doesn't like.
Comment
-
wel it can be set really short and you can lighten the pull even further by taking out all the magnets but 1 and having a few folded bits of paper between the one magnet and the frame. I don't like mine so short you can just tap it but it can get that short.Comment
-
I take it you sold your Rt for this E-mag huh.
Comment
-
from the factory, the trigger is gonna rip. I know people who have had their e-mags over a year and have never changed a single thing on their trigger and love it. Most everyone else loves to tinker. Including me.
There is 1 magnet and a o-ring under it for my trigger weight.. It's super light and I can rip too much paint with it. I'm about broke. my suggestion, leave the trigger how it comes so you don't go broke too..
BrianComment
-
good advice but I dont know if I can follow it. I'm like most people. tinker with it until either it breaks or its perfect. I hope for the second and usually get the firstBlack Warp Left E-mag #EM00163
emagnum board
14in freak
12v smoke warp w/ interlink
drilled 12v revy w/ JMJ impeller and WAS turbo rev board
shocktech drop
AGD flatline dovetail adaptor
68 3000 flatline
***soon to be***
emagnum body rail
black powder coat
custom grips from FrymarkerComment
-
Mine was pretty much right when it came outa the box. But you know the first thing I had to do to it don't you?
But I just got it back from AGD and while it was there Gunga set it all up right for me and it rocks now. I don't got the knack for setting it but even out of wack a ways this thing is still sweet!
See my signature line...You are in for a treat!Comment
Comment