PMI Perfect Drop Help...

[InfinatyBPS]

I have one on my cocker, and the stupid ASA part, not the part holding on the asa, the asa is realy lose and wobbles side to side and is real annoying, anyone else have this problem? Anyone know how to fix it?

[gothicel]

first of all, what is an ASA. I have never found out where that is on the drop forwards. I have a PMI perfect too.

[Smokee_2_7]

yes, i have one, and yes, i know what your talking about. What youve got to do is tighten up the set screw that holds the asa in place. Look at the drop from the top, where it attaches to the asa. take the set screw out, and slide the whole asa off. the actual asa connects to a dovetail mounting peice which in turn slides onto the rail. Look for the screw that attaches the asa to the dovetail peice. tighten it up. Re-assemble.

That should do it for ya.

gothicel,

An ASA is the peice that your tank actually screws into. I cant remember what the acronym actually stands for.

Hope this helps.

Carl

[RobAGD]

ASA = Air Source Adapter

-Robert

[InfinatyBPS]

Thanks Smokee, I tightened that sucker up.