Buying my first hopper, which one? 12v or 9v?

[ScoobYSnax]

Hey guys, I have my mag setup now, but I need a hopper, I just can't decide which one. I currently have a PF mag w/stock valve and a DYE 2x frame. I might, however, be getting a retro in about a week or so. So here is my question--should I get a 9v revvy or 12v revvy?

Incase it matters, I'm a newb. I've played about 5 times, so I'm not very quick on the trigger. I'm more concerned with not short-stroking. I've found 9v for $20-25 and 12v for around $35. So which should it be? Also, is the x-board a must-have feature? Let me know your opinions guys, thanks!

[Snooky]

just buy the 12v x-board and be done with it. i guarentee down the road you'll want a 12v if u buy a 9v and when u get the 12v you'll want an x-board.

X-board takes out time delay and makes the loader faster.

[DOWNWITHANGELS]

I say get a HALO. They are the fastest ones out and it looks like they will be for a while too.

[obsolete898]

^^^^ definately, but if you can't afford it Xboard. The 9v shouldn't even be an option.

[skipdogg]

if your getting a retro soon, dont get a 9V. also, i prefer the Ricochet over a revi

[SlipknotX556]

12v revvy with X board and it works perfect.

[RaV3n_Pa1ntba||]

Get neither... get a richochet AK or 2K ... they own and are faster than 12v Revvys with X-board not to mention that they come in neat colors and you dont have to pay extra for it. They are well worth it.

And if not that go for a Halo

and if not that go for a JmJ Impellared Revvy with X-Board which is found here: Click here

[toymyster]

Don't even bother with a 9v!!! Go straight for an X-board revvy, a Ricochet, or the Halo!!

[nutz]

yea skip the slow junk and get the faster hopper.. it will be worth it in the long run

[spliff]

Get your self a 9v revvy for 25$ Then get yourself a TurboRev plus upgrade from Wicked Air Sports for $45 shipped. It comes with a new board that is faster then the X-board, and a 6 Blade vortex imeller. It is insanely fast.

[oldsoldier]

Just go with the 12v revvy w/x-board. It goes plenty fast. You wont outshoot it. Besides, sooner or later you will buy an intelliframe, like the rest of us. Then, you wont need to worry about it!

[Cliffio]

i wouldnt waste my money on a 9v, they just dont feed fast enough, just get yourself a 12v and dont worry about it

Cliff

if you dont wanna spend alot of money, buy a used one on line

[Predator]

Don't skimp on the hopper, get the best you can. Get the 12vt revvy with x-board. You'll need at least that if you get a retrovalve. I'd suggest a intelli-frame to go with it after that. That would make a very reliable feeding system for your mag.

[toymyster]

Hey Spliff, do you have one of those Turborev boards??? My buddy got 2 of them, they lasted a half a day each!!! Wanted to know if anyone else has had any experience with one!!!

[RT pRo AuToMaG]

i'll sell you my clear 12v for $40.