Longnose Bolt?

[ChuckWag78]

Where Can I get one? Are they better then the Superbolt?

[Xzion]

you can get them in the AGD online store, found at the link at the top of this page.

well, I wouldnt say better than a superbolt. basically all they are is a stock bolt, that has the 'neck' raised up so its flush with the boltface, which helps reduce blowback.

They should really be called a 'Long Neck Bolt' because only the neck of the body is extended. Ive included a pic below of the various bolts

from left to right, the bolts are shown as follows:
Long Nose Bolt, 'Classic' Bolt, Foamy Bolt.

[ChuckWag78]

Thanks Alot

[ChuckWag78]

I couldn't find the Longnose Bolt anywhere on the Airgun site. And I cant find it anywhere else. Any Ideas?

[BlackVCG]

The long nose bolt is refered to as the foamieless or hard nose bolt. It's now the standard foamieless bolt for all AGD guns, so it's not considered the long nose bolt.

[ChuckWag78]

Again Thanks Alot for everyones help

[ProjectMag]

Here

http://store.airgun.com/acb/showdetl.cfm?&DID=17&Product_ID=34&CATID=6

[Snooky]

why is reducing blowback importnat?

[Xzion]

Reducing blowback is primarily important for people using a gravity fed loader. Blowback can bobble balls a little in the feed neck, and delay the balls from dropping into the breech, and potentially cause a chop, with less blow back, there's less delay in the ball dropping into the breech, and therefore less chance of chopping a ball.