my micromag.(need a trigger suggestion)

[martlet1]

I have a red nights micromag with a a.i.r. valve, with Micromag on it. I love the gun, but the trigger pull sucks compared to my other guns. I would like to get a double trigger frame, but I just need to know what the best option would be for my gun. Will the intelliframe match up well with the micromag frame? Or is there another option. I would like to keep this under $200 if possible.

[ElementEclipse]

options with 200 dollars-

Hyperfame- 200 used

Inteliframe(will fit)- 100

Retro Valve- 200 used

Anyone of those will work great and help out your bad trigger pull.

[Zygote]

The intelliframe will work well...with a few small problems.

If the diameter of your front grip extends beyond the edge of the vertical adapter you'll either need a skinnier one or a foregrip extender. Otherwise the trigger guard will get in the way.

I have an older micromag so I'm not sure if the newer ones run into this problem, but the pin that holds in the sear is inserted through a hole in the body just above the grip frame. The stock micromag frame extends up just far enough to cover a bit of the hole and keep the pin from slipping out. The intelliframe doesn't extend far enough, so my sear pin is held in with duct tape for now, until I find a more permanent solution.

Other than that, the intelliframe is great.

[magatron]

i hear nothing but greatthings about the retrovalves, and i'm not 100%sure if they'll do this on micros but i don't imagine why not; if you look at the agd shop theres a go retro thing where you can mail them your valve system, and like 200bucks and they'll send ya a retro valve. obviously you have a n2 tank and this would work out for you.

[Croix71]

You could also try a Dye double trigger for around $60. Not sure how the trigger pull is though.

Also keep in mind that it your are altering the look of your gun cosmetically. i.e. you won't have the red/black anodize on and it will have a larger trigger guard that could make you change the location of your gas thru. But if your not one the guys worried about cosmetics, forget I even mentioned it.