Horrible day.

[Load SM5]

Re: Horrible day.

Originally posted by SlipknotX556
my warp was a piece of crap and my mag was F@!@!$# BAD as hell!

If you ask me, and you did'nt. It sounds like you're blaiming your mag and warp for a problem with some screws and a mis-aligned drop. Or did I read that wrong?

Sorry you had a bad day.

[FutureMagOwner]

sounds like you stripped the screws making them so tight which is your fault and im not being rude but that is the truth if you try and tighten them too much they strip so dont tighten em so much got it!

[SlipknotX556]

Yes I did strip my screws thats why I could not play. My warp was a piece of crap Load SM5 I took the warp off and tried using my mag with my revvy as I would normally do if I didnt have my warp, but My mag was chopping all the time, it was skipping shots.



NOTE!- I will delete this thread if it gets out of hand.

[Load SM5]

If it was skipping shots and chopping it sounds like your revvy was messing up.

Was this the first time out with the warp? They can be a little frustrating to set up, sometimes.

[SlipknotX556]

Yes it was my first time with a warp feed.

[The Mag Man]

You should have tested your warp setup before you played the first game. I learned that the hard way. I forogt to adjust my long style PF plug before I played my first game, and I ended up missing a GREAT game! Made me mad, Warps take patients, they can be hastle to setup, but when you get them right, WATCH OUT!

[Mango]

Originally posted by SlipknotX556
Yes I did strip my screws thats why I could not play. My warp was a piece of crap Load SM5 I took the warp off and tried using my mag with my revvy as I would normally do if I didnt have my warp, but My mag was chopping all the time, it was skipping shots.



NOTE!- I will delete this thread if it gets out of hand.

You made the thread, and the only reason it would get out of hand is because of the creator: you. Why dont you just calm down, and describe exactly what happened? From what I have so far this is what happened:

1.) You stripped all the screws holding your drop and warp together.
2.) You get upset because the setup is loose and blame the warp/marker.
3.) You remove the warp (which to me sounds shadey because if the screws were stripped, how did you remove them???) and put a hopper on the marker.
4.) The marker chops paint and was skipping shots. Sounds like a feeding issue.

now let me ask you this, how many dip switches are on the warp and was intellifeed enabled? Or was the vibration sensor activated. Because if your frame screws were all loose, the vibration sensors functioning would be dampened significantly.

So supply us with as much intelligable information as possible, and we will do our best to help you.

[SlipknotX556]

I know what the problem is now. I look over the screws and my warp mount and my ASA. The screws that I had put in their were to small. I had to use washers to make them kind of reach. I will go to home depot and get some longer ones.



I am sorry if I got out of hand. Its just that it was my first time using the warp and I was pretty damn mad.

[RT pRo AuToMaG]

i could have told u that the warp would be a piece-o-crap. get a halo, the warp is just another thing that will break. as far as the tank goes, that just sux. similar thing happened to me. i just got z-grip and i didn't sand off the wings and the sear wasn't catching on, couldn't play the whole day, so i reffed. i know, it sux getting all excited, and not being able to play.

[SlipknotX556]

Yes it does suck not being able to play.

[TigerMan]

Just to add to this, since I remember you had like almost the exact same setup as mine from seeing your pics, my screws on my marker come loose about once a day and I believe its due to the weight of the gun. Not sure if it's because of the weight but it could be possibly since it does weigh a lot.

[Mango]

its cool man, we just want to be able to help you out. Glad you found the problem.

[Croix71]

Originally posted by SlipknotX556
why should I go and do that?

[SlipknotX556]

Didnt know that sorry I really dont know much about what the mods do because I dont read alot of posts.